Closing The System Board From The Right - Xerox Copycentre C20 User Manual
Color ink jet printer
Hide thumbs
Also See for Copycentre C20:
- User manual (215 pages) ,
- Evaluator manual (16 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
Option Card Installation
Closing the System
Board from the Right
C-24
DocuPrint C20/NC20 User Guide
Complete the following steps after you install an option
card:
1
Insert the four tabs on the top of the system board access
cover into the slots on the printer as illustrated.
2
Slide the system board access cover to the left until it
snaps into place.
3
Reconnect all cables to the back of the printer.
4
Reconnect the power cord to the printer and a properly
grounded electrical outlet.
5
Verify that the Ready message appears on the Control
Panel display.
If an error message appears, see Chapter 5 in the System
Administrator Guide.
To verify that the option card is installed properly,
see Chapter 3, Printing Menu Settings.
Advertisement
Table of Contents
