Option Card Installation; Accessing The System Board From The Right - Xerox Copycentre C20 User Manual
Color ink jet printer
Hide thumbs
Also See for Copycentre C20:
- User manual (215 pages) ,
- Evaluator manual (16 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
Option Card Installation
Accessing the System
Board from the Right
Follow the steps in this section to install either of the
following options:
• Tri-Port Interface Card
• Hard Disk.
An option card is easily damaged by static electricity.
Touch something metal to discharge any static
electricity before you touch it.
Complete the following steps before you install the
option card:
1
Unplug the printer power cord.
2
Disconnect all cables from the back of the printer.
3
Push on the thumb indention, located on the right side of
the system board access cover, and slide the cover to the
right until it releases.
4
Pull the cover away from the printer.
5
Continue with the section "Installing an Option Card" on
the next page.
Option Card Installation
Appendix C: Printer Options
C-21
Advertisement
Table of Contents
