Using Tray 2 - Xerox Copycentre C20 User Manual

Loading Paper

Using Tray 2

2-12 DocuPrint C20/NC20 User Guide
The optional Tray 2 can be used for several different types
of paper. See the Supplies/Options Guide for sizes and
capacity.
To Load Tray 2:
1 Squeeze the tab located on the width guide lever and slide
the width guide lever to the far left side of the tray.
If you are loading envelopes, go to Step 4 on page 2-13.
2
Flex the sheets back and forth to loosen them, then fan
them. Do not fold or crease the paper. Straighten the
edges on a level surface.
3 Place the print material against the right side of the input
tray with the recommended print side facing you and the
top edge in first. (Insert letterhead paper with the top of
the page facing down.) Go to Step 5 on page 2-13.
Do not overfill Tray 2 because the print material
may not feed correctly through the printer or you
may get a paper jam.