Xerox Copycentre C20 User Manual page 42

Loading Paper
2-10 DocuPrint C20/NC20 User Guide
To Load the Manual Feed Slot
1 If you are loading envelopes, go to Step 2. Place a single
sheet of print material face up with the side of the print
material aligned against the right side of the manual feed.
If using preprinted letterhead, see the section "Using
Letterhead" (page 2-19) for proper page orientation. Go to
Step 3.
2 Place a single envelope face up with the long side aligned
against the right side of the manual feed. Put the envelope
stamp side up with the stamp corner facing down.
3 Slide the print material as far as it will go into the manual
feed slot. If you do not insert the print material far
enough into the manual feed slot, it may skew or not feed
at all.
Feed print material one at a time. If you try to load
more than one piece of print material, the printer
may attempt to feed all of the print material
through the paper path, causing a paper jam or
damaging the printer.
If you are not using large-size paper, go to Step 5 on
page 2-11.