Safety Precautions - SaMASZ UNO 410 Operator's Manual

OPERATOR'S MANUAL ROTARY RAKE
Tab. 2. Recommended PTO shaft
Rake Power Length Momentum
HP ft. in
UNO 410
1400-2004
UNO 440 35
4' 7"-6' 6"
UNO 470
NOTE:
Optional extra equipment should be ordered separately.
PTO shafts of other brands with equivalent technical parameters may be used on the SaMASZ
permission.

4. SAFETY PRECAUTIONS

The following precautions are for your safety. They must be read carefully and
followed by every person who operates or maintains the machine. Failure to follow these safety
precautions could result in serious injury or death to the operator, maintenance person or
bystanders and property damage to the machine and surrounding property.
Safety Signal Words
This manual and the safety labels attached to this equipment utilize signal words that signify safety
hazards with different levels of severity. Below are the words used and the definitions for these
words:
• DANGER indicates a hazardous situation which, if not avoided, will result in death or
serious injury
• WARNING indicates a hazardous situation which, if not avoided, could result in death or
serious injury
• CAUTION indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury
• NOTICE is used to address practices not related to physical injury Safety rules and
regulations
UNO
Symbol
Nm
460 8G4R140U2WR7001
Fig. 3. Shaft lubication
Clutch Manufacturer
Overload Bondioli
M=800Nm Pavesi
Remarks
-
7