Table of Contents
Advertisement
ACPI Settings
This section configures system ACPI parameters.
Wake on LAN
Enable or disable WOL (wake-on-LAN) to wake the system through an Ethernet adapter
of the system. The default is enabled.
After G3
Specify what state the system should be in when power is re-applied after a power fail-
ure (G3, the mechanical-off, state).
S0 State
The system is in working state.
S5 State
The system is in soft-off state.
Chapter 7 BIOS Setup
Chapter 7
CPU Configuration
This section configures the CPU.
Intel
SpeedStep™
®
Enable or disable the Enhanced Intel SpeedStep
balance between system's power consumption and performance. After it is enabled in
the BIOS, you can enable the EIST feature using the operating system's power manage-
ment feature.
31
Technology, which helps optimize the
®
www.dfi.com
Advertisement
Table of Contents
