Table of Contents
Advertisement
WDT
Enable or disable the watchdog function. A counter will appear if you select to enable
WDT. Input any value between 1 to 255.
AC Power Loss
Set the AC power loss to Always off or Always on. When set to Always off, the system's
status will be power-off after an AC power loss event. When set to Always on, the sys-
tem's status will be power-on after an AC power loss event.
ERP Support
Enable or disable ERP (Energy-related Products) support. Disable the ERP support to
allow the system to consume power so it may continue to supply power to devices on the
system such as the USB and LAN ports. Or enable the ERT support to not allow the system
to consume power in S4 (hibernate) and S5 (soft-off ) states. The default is disabled.
Note:
WOL (wake-on-LAN) will be disabled if ERP Support is enabled.
Chapter 7 BIOS Setup
Chapter 7
PC Health Status
This section displays PC health status.
38
www.dfi.com
Advertisement
Table of Contents
