Cl3152 Classroom Intruder Operation Check; Cylinder Removal (Conventional); Cl3120 Outside Lever Removal - Assa Abloy Corbin Russwin CL3100 Series Installation Instructions Manual

Grade 1 Key-In-Lever VR Lever Lock
CL3100 Series
Installation Instructions
10

CL3152 Classroom Intruder Operation Check

Note
When inside key locks outside lever, outside key retracts the latchbolt but cannot unlock the outside lever. Outside key
must be rotated back completely clockwise before removing the key.
Inside lever is marked with
"LOCK" and direction arrow
to indicate locking direction.
11

Cylinder Removal (Conventional)

1. Remove 6 lobe security set screw.
2. Insert key and rotate 45° clockwise to
release lever catch.
3. Depress lever catch and remove lever.
Note
Interchange core cylinders do not require removing
the lever to remove (page 11 step 13D).
12

CL3120 Outside Lever Removal

1. Remove 6 lobe security set screw.
2. Orient cam in outside sleeve with flat blade screwdriver to release lever catch button (page 7 step 7).
3. Depress lever catch and remove lever.
For Installation Assistance contact Corbin Russwin
1-888-607-5703 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2016, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Inside:
Rotate key clockwise to lock.
Rotate key counter clockwise
to unlock.
Figure 14
Classroom Intruder Operation Check
Outside:
Rotate key counter
clockwise to lock.
Rotate key clockwise
to unlock.
1
3
Lever catch
lever catch
3
45˚
45°
2
Figure 15
Cylinder Removal
9
FM345 01/19