Assa Abloy SECURITRON CEPT-10 Installation Instructions

Assa Abloy SECURITRON CEPT-10 Installation Instructions

Concealed electrical power transfer unit

Advertisement

www.TMHardware.com
PRODUCT COMPATIBILITY NOTE: The Securitron CEPT will NOT operate properly on
openings with the following door/frame/hinge configurations:
 Offset Pivots
 Butt Hinges over 6"
Traditional Connect
DESCRIPTION
The Concealed Electrical Power Transfer CEPT unit is designed to provide a secure multiple wire
power and/or data transfer between a door frame and door. The unit mounts directly between
the frame and door along the hinged edge and is available in three multi-wire configurations.
The CEPT is non-handed, allows mechanical (hinged) movement of the door and is totally
concealed when the door is fully closed.
successfully install a CEPT to a standard hinged door opening.
www.TMHardware.com
Securitron Magnalock Corp.
Tel 800.624.5625
CONCEALED ELECTRICAL POWER TRANSFER SERIES CEPT
CONCEALED ELECTRICAL POWER TRANSFER UNIT
INSTALLATION INSTRUCTIONS
CONCEALED ELECTRICAL POWER TRANSFER SERIES CEPT
PRODUCT COMPATIBILITY NOTE: The Securitron CEPT will NOT operate properly on
INSTALLATION INSTRUCTIONS
openings with the following door/frame/hinge configurations:
Model Supplied is EL-CEPT
 Offset Pivots
 Butt Hinges over 6"
Available CEPT Models:
CEPT-10
Traditional Connect
10 Wire (2 + 8)
(2) Wire Nut
CEPT-10
+ (8) Crimp
10 Wire (2 + 8)
DESCRIPTION
(2) Wire Nut
+ (8) Crimp
The Concealed Electrical Power Transfer CEPT unit is designed to provide a secure multiple wire
Connectors: 8 Pin + 4 Pin
power and/or data transfer between a door frame and door. The unit mounts directly between
the frame and door along the hinged edge and is available in three multi-wire configurations.
The CEPT is non-handed, allows mechanical (hinged) movement of the door and is totally
concealed when the door is fully closed.
successfully install a CEPT to a standard hinged door opening.
© Copyright, 2011, all rights reserved
Securitron Magnalock Corp.
Tel 800.624.5625
www.securitron.com
techsupport@securitron.com
INSTALLATION INSTRUCTIONS
 Pocket Pivots
 Swing Clear Hinges
 Pocket Pivots
Available CEPT Models:
 Swing Clear Hinges
EL-CEPT
ElectroLynx®
(Assa Abloy)
12 Wire (8 + 4)
EL-CEPT
Connectors: 8 Pin + 4 Pin
ElectroLynx®
(Assa Abloy)
(TIA/EIA-568-B Compatible)
12 Wire (8 + 4)
This manual provides the information required to
This manual provides the information required to
Page 1
www.securitron.com
techsupport@securitron.com
ASSA ABLOY, the global leader
in door opening solutions
 Center Hung Doors
 Balanced Doors
 Center Hung Doors
 Balanced Doors
CEPT-C5E
CAT 5e
(TIA/EIA-568-B Compatible)
9 Wire (8 + 1)
CEPT-C5E
Connectors: 6 Pin + 4 Pin
CAT 5e
9 Wire (8 + 1)
Connectors: 6 Pin + 4 Pin
ASSA ABLOY, the global leader
in door opening solutions
PN# 500-22115
Page #1
Rev. C, 05/11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SECURITRON CEPT-10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Assa Abloy SECURITRON CEPT-10

  • Page 1 Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader www.TMHardware.com Tel 800.624.5625 techsupport@securitron.com in door opening solutions CONCEALED ELECTRICAL POWER TRANSFER SERIES CEPT CONCEALED ELECTRICAL POWER TRANSFER UNIT...
  • Page 2 Components included with this Product: Item Description Quantity CEPT Assembly Back Box Screws, 10-24 x 3/4” Phillips Flat Head Undercut (for metal) Screws, #10 x 3/4” Phillips Flat Head (for wood) Strain Relief Bushing Wire Nut (CEPT-10 Only) Dolphin™ Connector (CEPT-10 Only) RECOMMENDED TOOLS Basic for Factory Prepped Door Install: Additional for More Detailed Install:...
  • Page 3 Electrical The following chart shows the electrical specifications for each CEPT model. MODEL TYPE WIRE SIZE/QTY CURRENT LIMIT (Per Wire) 18 AWG/2 Max. 5A CEPT-10 10 Wire (2+8) 22 AWG/8 Max. 1A EL-CEPT ElectroLynx® (8+4) 22 AWG/12 Max. 1A 24 AWG/8 Max.
  • Page 4 When required, install the appropriate connectors for ElectroLynx® or CAT 5e (not  included) to the end of your utility cable.  Using a #2 Phillips screwdriver, attach each back box to the door and/or frame using the 10-24 x 3/4” long screws (for metal) or the #10 x 3/4” long screws (for wood). These screws are to be placed through the center hole in each flange of the back box.
  • Page 5 CENTERLINE OF CUTOUTS MUST ALIGN WHEN DOOR 1 " " IS CLOSED PROVIDE STEEL BACKING TAB (2 REQUIRED) THIS VARIABLE DIMENSION " .105" THICK (12 GAUGE) RECOMMENDED - IS DEPENDENT ON DOOR THICKNESS .060" THICK (16 GAUGE) MINIMUM " " 4 "...

This manual is also suitable for:

Securitron el-ceptSecuritron cept-c5e

Table of Contents