Lock Operation
Change Default Master Code Before Programming*
1. Enter the 8-digit default Master PIN code (12345678) followed by the
2. Enter "1" followed by the
3. Enter new 4-8 digit Master PIN code followed by the
*Default Master PIN Code must be changed prior to programming the lock.
1
1
Enter current Master PIN code,
followed by the
key.
PIN code structure
Maximum number of user codes is 250 with Network Module; without Network Module,
maximum is 25 user codes.
Set Up User Codes
User Codes can only be programmed through the Master Code.
1. Enter the 4-8 digit Master PIN code followed by the
2. Enter "2" followed by the
3. Enter the User number to be registered (1-25) followed by the
4. Enter a 4-8 digit PIN code for the User number followed by the
Note: When registering User codes, the code must be entered with in 20 seconds.
If time expires, no codes are registered and the process must be re-started.
Privacy Mode vs. Lockout Mode
LockoutisaMenufeaturethatrestrictsPincodeaccess(exceptMaster).
Privacymodeissetbypressingandholdingthebutton(foundbelowthumbturn)fora
durationoffourbeeps.Thisdeactivatesthekeypad,andbecauseitissetfromtheinside,
providesasecurelockfortheconvenienceoftheoccupant(s).
An ASSA ABLOY Group brand
key.
2
Enter '1' to change Master PIN code,
followed by the
key.
key.
key.
key.
3
Enter the new Master PIN code (4~8
digits), followed by the
key.
key.
key.
P/N AYRD210-INST-FUL Rev B
key.
11