Summary of Contents for Assa Abloy MSL mFlipLock check 24471
Page 1
Montage- und Bedienungsanleitung / Assembly and operating instructions / Installations- und Montageanleitung Instruction de montage et d’utilisation / Istruzioni per l’uso e il montaggio The global leader in ASSA ABLOY, the global leader DXXXXXNN CHMSL1442002 door opening solutions in door opening solutions...
Page 2
All manuals and user guides at all-guides.com Lesen Sie diese Anleitung vor der Benutzung sorgfältig durch und bewahren Sie sie auf. Die Anlei- tung beinhaltet wichtige Informationen zum Produkt, insbesondere zum bestimmungsgemäßen Gebrauch, zur Sicherheit, Montage, Benutzung, Wartung und Entsorgung. Geben Sie die Anleitung nach der Montage an den Benutzer und im Falle einer Weiterveräußerung mit dem Produkt weiter.
All manuals and user guides at all-guides.com Produktinformation Produktbeschreibung mFlipLock check Das mFlipLock check (Abb. 1) ist eine Panik-Sicherheits-Mehrpunktverriegelung mit mechanischer Entriege- lung, integrierter Statusrückmeldung, drei Riegeln und drei blockierenden Kippfallen (englisch: fliplatch) mit Geräuschdämmung. Durch die Kippfallen lässt sich die Tür auch unter hoher Vorlast öffnen. Beim Entriegeln werden die Riegel mechanisch eingezogen und anschließend werden die Kippfallen freigegeben.
All manuals and user guides at all-guides.com Abb. 1 : Panik-Sicherheits- Beispiel einer Beispiel einer Mehrpunktverriegelung Produktvariante Produktvariante mFlipLock check für eine für eine einflügelige Tür zweiflügelige Tür Kennzeichnung der Produktvarianten Tab. 1 : Kennung Bedeutung Produktvarianten PE / check mit Panikfunktion E („mFlipLock check mit Panikfunktion E“, Seite 14) PB / check mit Panikfunktion B (Umschaltfunktion) („mFlipLock check mit Panikfunktion B“, Seite 14)
All manuals and user guides at all-guides.com Begriffserklärung Nr. Benennung Begriffserklärung – Fluchttürfunktion / Eine Tür mit Fluchttürfunktion kann in Fluchtrichtung (in der Regel von innen) jederzeit über den Türdrü- Panikfunktion cker geöffnet werden, auch die verriegelte Tür. Die Türen sind in Fluchtrichtung mit einem Fluchttürbe- schlag (zum Beispiel einer Panikdruckstange) ausgestattet.
Page 7
All manuals and user guides at all-guides.com Abb. 2 : Schematische Darstellung des Schlosses mFlipLock check Abb. 3 : Funktionsluft Produktinformation...
All manuals and user guides at all-guides.com Hinweise Zu dieser Anleitung Diese Installations- und Montageanleitung wurde für Handwerksfachkräfte und eingewiesenes Personal geschrieben. Lesen Sie diese Anleitung, um das Gerät sicher zu installieren, zu betreiben und die zulässi- gen Einsatzmöglichkeiten, die es bietet, auszunutzen. Die Anleitung gibt Ihnen auch Hinweise über die Funktion wichtiger Bauteile.
All manuals and user guides at all-guides.com Sicherheitshinweise Warnung! Lebensgefahr, Verletzungsgefahr durch verminderte Feuerschutzfunktion: Feuerschutztüren (auch Rauchschutztüren) verhindern den Durchtritt von Feuer (Rauch). Diese Türen werden als Ganzes geprüft: · Halten Sie bauaufsichtliche Vorschriften ein. · Prüfen Sie, dass die Zertifizierung der Schutztür zum Schloss passt. ·...
Page 10
All manuals and user guides at all-guides.com Warnung! Ungeeignete Verschlüsse vermindern den Personenschutz und Feuerschutz: Das Schloss ist für Feuer- schutz- oder Rauchschutztüren geeignet („Klassifizierungsschlüssel“, Seite 16). · Prüfen Sie, ob die Zertifizierung der Tür zum Schloss passt. · Achten Sie darauf, dass das Schloss in passender Größe und mit dem passenden Zubehör eingebaut wird.
Page 11
All manuals and user guides at all-guides.com Achtung! Sachschaden durch Arbeiten am Türblatt: Vor Arbeiten am Türblatt, zum Beispiel Bohren oder Fräsen, müssen Sie das Schloss ausbauen. Funktionseinschränkung bei falscher Funktionsluft: Stellen Sie die Funktionsluft („Begriffserklärung“, Seite 6) passend ein („Technische Daten“, Seite 25) Sachschaden durch ungeeignetes Schließblech: Das Schließblech müssen Sie so auswählen und montie- ren, dass es immer die Anlauf- und Gleitfläche für die Schlossfalle bietet.
All manuals and user guides at all-guides.com Bestimmungsgemäßer Gebrauch Die Panik-Sicherheits-Mehrpunktverriegelung mFlipLock check ist zum Einbau in ein- oder zweiflügelige Rohrrahmen-, Vollblatttüren oder für Türen mit Kunststoffprofilen geeignet. Es ist nicht zum Einbau in Pendeltüren geeignet. Das Schloss ist geeignet für Türverriegelungen in Sicherheitsbereichen und Rettungswegen entspre- chend folgender Normen: ·...
All manuals and user guides at all-guides.com Funktionen und Bedienung Selbstverriegelung Das Schloss ist mechanisch selbstverriegelnd und somit ist die Tür Abb. 5 : in geschlossenem Zustand immer verriegelt. Das Schloss entrie- Steuerfalle gelt über eine mechanische Betätigung. Kippfalle Riegel Funktionsprinzip beim Verriegeln Beim Schließen der Tür werden die ausgefahrenen Kippfallen (Abb.
All manuals and user guides at all-guides.com Produktvarianten mFlipLock check mit Panikfunktion E durchgehende Das mFlipLock check ist mit einer durchgehenden Drückernuss ausgestattet, so dass Innendrücker ange- Drückernuss koppelt ist und der Aussendrücker nicht angekoppelt ist. Typischerweise wird außen (entgegen der Fluchtrichtung) ein Beschlag mit Knauf und innen (in Fluchtrichtung) ein Fluchttürbeschlag montiert.
Page 15
All manuals and user guides at all-guides.com Funktionen und Bedienung...
All manuals and user guides at all-guides.com Klassifizierungsschlüssel EN 1125 Paniktürverschlüsse Der Klassifizierungsschlüssel beschreibt die Eigenschaften von Schlössern nach EN 1125. Tab. 4 erläutert den Klassifizierungsschlüssel. Tab. 4 : Klasse Bedeutung Klassifizierungsschlüssel nach EN 1125 Hohe Nutzungshäufigkeit, begleitet von nur wenig Anreiz zur Sorgfalt, wo die Möglichkeit eines Unfalls oder eines Missbrauchs gegeben ist 200.000 Prüfzyklen Türmasse bis 200 kg...
All manuals and user guides at all-guides.com EN 179 Notausgangsverschlüsse Der Klassifizierungsschlüssel beschreibt die Eigenschaften von Schlössern nach EN 179. Tab. 5 erläutert den Klassifizierungsschlüssel. Tab. 5 : Klasse Bedeutung Klassifizierungsschlüssel Hohe Nutzungshäufigkeit, begleitet von nur wenig Anreiz zur Sorgfalt, d. h., wo die Möglichkeit nach EN 179 eines Unfalls oder eines Missbrauchs gegeben ist 200.000 Prüfzyklen...
All manuals and user guides at all-guides.com Montage Warnung! Prüfen auf Beschädigung: Beschädigungen der Kabel können zu Stromschlägen führen. Beschädigungen an den Metallteilen können zu Verletzungen führen. Ein beschädigtes Gerät ist ein Sicherheitsrisiko. · Ein beschädigtes Gerät dürfen Sie nicht in Betrieb nehmen. Auch beschädigte Kabel oder Steckverbin- dungen dürfen Sie nicht verwenden.
Page 19
All manuals and user guides at all-guides.com Abb. 6: Sachschaden vermeiden max. 150 N Montage...
All manuals and user guides at all-guides.com Montieren Vorsicht! Verletzungsgefahr durch scharfe Kanten und Späne: Beim Bohren und anderen zerspanenden Arbeiten besteht durch scharfe Kanten und Späne Verletzungsgefahr. · Schützen Sie die Augen durch eine geeignete Schutzbrille. Montage vorbereiten Vorsicht! Ungeeignete Türen vermindern den Personen- und Einbruchschutz: Nur zugelassene und technisch einwandfreie Türen sind für die Montage des Schlosses geeignet.
All manuals and user guides at all-guides.com Schloss montieren Achtung! Tür vor unbeabsichtigtem Schließen schützen: Bei Modellen mit dem Zusatz SV verriegelt das Schloss eine zugefallene Tür automatisch und kann danach nur über ein elektrisches Steuersignal oder über den Schließzylinder wieder entriegelt werden. ·...
Seite 13). Bei einigen Türzargen z. B. mit thermischer Trennung kann es sein, dass ein Profilsteg vorhanden ist, der auf der Gleitfläche störend wirkt. Dieser Profilsteg muss im Bereich der Fallen und der Steuerfalle entfernt werden. ASSA ABLOY Sicherheitstechnik GmbH empfiehlt die Verwendung eines Schließ- bleches mit Lappeneinlauf, um eine ebene Gleitfläche zu erzeugen Decken Sie vorhandene Profilnuten oder andere Unebenheiten ab.
All manuals and user guides at all-guides.com Schloss mit Selbstverriegelung manuell prüfen Abb. 9: Manuelle Funktionsprüfung (mit Selbstverriegelung) Montage...
All manuals and user guides at all-guides.com Schloss ohne Selbstverriegelung manuell prüfen Abb. 10: Manuelle Funktionsprüfung (ohne Selbstverriegelung) Montage...
All manuals and user guides at all-guides.com Technische Daten Tab. 6: Eigenschaft Ausprägung Technische Daten Dornmaß: Rohrrahmentür und Vollblatttür 30 mm bis 80 mm (in 5 mm Schritten) Entfernung bei Schweizer Rundzylinder 94 mm Entfernung bei Euro-Profilzylinder 92 mm Drückernuss 9 mm Funktionsluft 3 mm bis 6 mm...
All manuals and user guides at all-guides.com Kabelbelegung mFlipLock check Abb. 11 : Steckverbindung mFlipLock check Stecker Stecker Fliplock Check Anschlusskabel Fliplock Check Anschlusskabel schwarz schwarz rosa rosa grün grün violett violett grau grau braun braun türkis rot/blau blau blau gelb gelb weiss...
Page 27
All manuals and user guides at all-guides.com Tab. 7: Kabelfarbe Titel Kontakt Stecker PIN Bemerkung/Funktion Belegung des grau Steuerfalle Steuerfallenzustand (mit ext. Tür- Anschlusskabel kontakt in Reihe schalten) Steuerfalle ausgefahren: COM-NO geöffnet braun Steuerfalle eingefahren: COM-NO geschlossen blau Drücker links Drücker nicht betätigt: COM-NO geöffnet Drücker zu 10% betätigt:...
All manuals and user guides at all-guides.com Zubehör Schließbleche Abb. 12: Schließbleche für Holz BV-24421.R3243.2 BV-24421.R3243.1 19,4 19,4 Zubehör...
Page 29
All manuals and user guides at all-guides.com Abb. 13: Schließbleche für Metall BV-24421.R6333.2 BV-24421.R6333.1 19,4 19,4 Zubehör...
All manuals and user guides at all-guides.com Panikdruckstange und Panikgriffstange Zubehör nach EN 1125 MSL Panikgriffstange 5971.294 für Europrofilzylinder Distanz 92 5971.392 für CH-Rundzylinder Distanz 94 MSL Panikdruckstange (Pushbar) (eBar) 5980 mechanische eBar 5981 mechanische eBar mit potenzialfreien Kontakten 5982 mechatronisch eBar 5983 mechatronisch mit Notschalter eBar Zubehör...
All manuals and user guides at all-guides.com Wartung www.assaabloy.ch Achtung! Unsachgemäße Schmierung beschädigt das Schloss: Das Schloss innen nicht einfetten. Keine Schmier- stoffe in das Schloss spritzen. Keine harzenden Fette verwenden. · Fetten Sie nur die äußeren Gleitflächen des Schlosses ein. Schmierstoff Hersteller Bemerkung...
All manuals and user guides at all-guides.com Gewährleistung, Entsorgung Gewährleistung Es gelten die gesetzlichen Gewährleistungsfristen und die Verkaufs- und Lieferbedingungen der ASSA ABLOY Sicherheitstechnik GmbH (www.assaabloy.ch). Entsorgung Entsorgung nach EPD (Environmental Product Declaration). Führen Sie Verpackungsmaterialien der Wiederverwendung zu. Entsorgen Sie das Produkt als Elektronikschrott. Halten Sie die geltenden Vorschriften zum Umweltschutz ein.
All manuals and user guides at all-guides.com Problem, Ursache, Lösung Aktualisierte Informationen Problem Ursache Lösung Tür lässt sich von Hand Riegel wird bei geschlossener Tür nicht ausgefah- Stellen Sie die Tür und die Position des Schließ- aufdrücken bzw. aufzie- ren. blechs so ein, dass die Kippfalle frei in Schließblech hen, obwohl sie verrie- Kippfalle kann nicht frei ins Schließblech greifen.
Page 34
This document and all its parts are protected by copyright. Any utilisation or modification outside the strict limits of copyright law is prohibited and liable to prosecution if no prior consent has been obtained from ASSA ABLOY (Schweiz) AG. This particularly applies to copies, translations, microform reproductions and to storing and processing in...
Page 35
All manuals and user guides at all-guides.com Table of contents Product information ....36 Assembly ......50 Product description .
All manuals and user guides at all-guides.com Product information Product description mFlipLock check The mFlipLock check (Fig. 1) is a panic/security/multipoint locking system with mechanical unlocking, integrated status feedback, three bolts and three flip latches with noise insulation. Flip latches enable the door to be opened even under high initial loads.
All manuals and user guides at all-guides.com Fig. 1 : Panic security Product variant Product variant multipoint locking example for a example for a mFlipLock check single-leaf door double-leaf door Product variant identification markings Tab. 1 : Identification Meaning Product variants PE / check With E panic function (“mFlipLock check with panic function E”, page 46) PE / check...
All manuals and user guides at all-guides.com Explanation of terms No. Term Explanation of term – Escape route door Doors with an Escape route door function can be opened at any time in the escape direction (usually from function/panic the inside) using the door handle, even when the door is locked. The doors are equipped with an escape function route door fitting (e.g.
Page 39
All manuals and user guides at all-guides.com Fig. 2 : Schematic illustration of the mFlipLock check lock Fig. 3 : Rebate gap Product information...
All manuals and user guides at all-guides.com Notes About these instructions These installation and assembly instructions have been written for skilled tradespeople and trained personnel. The instructions have been designed to enable you to install and operate the device safely and to make full use of the permitted range of applications the device provides.
All manuals and user guides at all-guides.com Safety notes Warning! Danger to life, risk of injury due to impaired fire protection function: Fire doors (also smoke doors) prevent the passage of fire (smoke). These doors are inspected and tested as a whole: ·...
Page 42
All manuals and user guides at all-guides.com Warning! Unsuitable locks impair personal protection and fire protection: The lock is suitable for fire doors and smoke doors (“Classification key”, page 48). · Check whether the certification of the door matches the lock. ·...
Page 43
All manuals and user guides at all-guides.com At tention! Material damage caused by working on the door leaf: Dismantle and remove the lock before working on the door leaf, for example when drilling or milling. Impaired function caused by incorrect rebate gap: Adjust the rebate gap (“Explanation of terms”, page 38) appropriately (“Technical data”, page 57) Material damage caused by unsuitable strike plate: Select and assemble the strike plate so that it always provides a stop face and sliding surface for the latch.
All manuals and user guides at all-guides.com Intended use The mFlipLock check panic/security/multipoint locking system is suitable for installation in single-leaf or double-leaf tubular frame doors, timber doors or doors with plastic profiles. It is not suitable for installa- tion in swing doors. The lock is suitable for door locks in security areas and escape routes according to the following stand- ards: ·...
All manuals and user guides at all-guides.com Functions and operation Self-locking function The lock is mechanically self locking and the door is, therefore, Fig. 5 : always locked when in a closed state. The lock is unlocked by Trip latch mechanical actuation.
All manuals and user guides at all-guides.com Product variants mFlipLock check with panic function E Continuous follower The mFlipLock check is equipped with a continuous follower so that the inside handle is coupled and the outside handle is decoupled. Typically, a fitting with a knob is fitted on the outside (in the opposite direction to the escape direction) and an escape route door fitting is fitted on the inside (in the escape direction).
Page 47
All manuals and user guides at all-guides.com Functions and operation...
All manuals and user guides at all-guides.com Classification key EN 1125 panic door locks The classification key describes the properties of locks according to EN 1125. Tab. 4 explains the classification key. Tab. 4 : Class Meaning Classification key according to EN 1125 High usage frequency and little incentive for care in areas where the possibility of accident or misuse exists 200,000 test cycles...
All manuals and user guides at all-guides.com EN 179 emergency exit locks The classification key describes the properties of locks according to EN 179. Tab. 5 explains the classification key. Tab. 5 : Class Meaning Classification key High frequency of use and little incentive for care, i.e. in areas where the possibility of accident according to EN 179 or misuse exists 200,000 test cycles...
All manuals and user guides at all-guides.com Assembly Warning! Inspect for damage: Damage to cables can lead to electric shock. Damage to metal parts can lead to injuries. A damaged lock is a safety risk. · Never put a damaged device into operation. Never use damaged cables or plug connections. ·...
Page 51
All manuals and user guides at all-guides.com Fig. 6: Prevent material damage max. 150 N Assembly...
All manuals and user guides at all-guides.com Assembly Caution! Risk of injury caused by sharp edges and metal filings: Drilling and other machining operations can create sharp edges and metal filings which may cause injury. · Always particularly protect your eyes with suitable protective goggles. Preparing for assembly Caution! Unsuitable doors impair personal protection and burglary protection: Only approved and technically...
All manuals and user guides at all-guides.com Installing the lock At tention! Prevent the door from closing accidentally: In the case of models with the suffix SV, the lock automat- ically locks a closed door and can then only be unlocked again by an electric control signal or using the locking cylinder.
Some door frames, such as those with thermal separation, may feature a profile web that interferes with the sliding surface. This profile web must be removed in the area of the latch and trip latch. ASSA ABLOY Sicherheitstechnik GmbH recommends using a strike plate with a tab aperture to create a flat sliding surface Cover existing profile grooves or other uneven areas.
All manuals and user guides at all-guides.com Manually inspect the lock with self-locking mechanism Fig. 9: Manual function testing (with self-locking mechanism) Assembly...
All manuals and user guides at all-guides.com Manually inspect the lock without self locking mechanism Fig. 10: Manual function testing (without self-locking mechanism) Assembly...
All manuals and user guides at all-guides.com Technical data Tab. 6: Property Version Technical data Backset: Tubular frame door and timber door 30 mm to 80 mm (in 5-mm steps) Distance for Swiss round cylinders 94 mm Distance for Euro profile cylinders 92 mm Follower 9 mm Rebate gap...
All manuals and user guides at all-guides.com Cable assignment in mFlipLock check Fig. 11 : Plug connection mFlipLock check Plug Plug Fliplock Check Connection cable Fliplock Check Connection cable Black Black Pink Pink Green Green Purple Purple Grey Grey Brown Brown Turquoise Red/blue...
Page 59
All manuals and user guides at all-guides.com Tab. 7: Cable colour Title Contact Plug PIN Comment/function Connection cable Grey Trip latch Trip latch status (with external door assignment contact switched in series) Flip latch extended: COM NO open Brown Flip latch retracted: COM NO closed Blue Left handle...
All manuals and user guides at all-guides.com Accessories Strike plates Fig. 12: Strike plates for wood BV-24421.R3243.2 BV-24421.R3243.1 19,4 19,4 Accessories...
Page 61
All manuals and user guides at all-guides.com Fig. 13: Strike plates for metal BV-24421.R6333.2 BV-24421.R6333.1 19,4 19,4 Accessories...
All manuals and user guides at all-guides.com Panic touch bar and panic push bar Accessories according to EN 1125 MSL panic push bar 5971.294 for Euro profile cylinder distance 92 5971.392 for CH round cylinder distance 94 MSL panic touch bar (push bar) (eBar) 5980 mechanical eBar 5981 mechanical eBar with isolated contacts 5982 mechatronic eBar...
All manuals and user guides at all-guides.com Maintenance www.assaabloy.ch At tention! Incorrect lubrication will damage the lock: Do not grease the inside of the lock. Never inject lubricants into the lock. Do not use resinous greases. · Only grease the outer sliding surfaces of the lock. Lubricant Manufacturer Remark...
All manuals and user guides at all-guides.com Warranty, disposal Warranty The statutory warranty periods and the terms and conditions of sale and delivery of ASSA ABLOY Sicherheit- stechnik GmbH apply (www.assaabloy.ch). Disposal Dispose of in accordance with the EPD (Environmental Product Declaration). Always recycle packaging materials.
All manuals and user guides at all-guides.com Problems, causes, solutions Updated information Problem Cause Solution The door can be pushed The bolt is not extended when the door is closed. Adjust the door and the position of the strike plate or pulled open by hand Flip latch cannot freely engage in the strike plate.
Page 66
All manuals and user guides at all-guides.com Lisez attentivement cette notice d’instructions avant l’utilisation du produit et conservez-la soi- gneusement. La notice d’instructions contient des informations importantes relatives au produit et en particulier à son utilisation conforme à la destination conventionnelle, à la sécurité, au montage, à...
Page 67
All manuals and user guides at all-guides.com Sommaire Information sur le produit ..68 Montage ......82 Description du produit .
All manuals and user guides at all-guides.com Information sur le produit Description du produit mFlipLock check La serrure mFlipLock check (Fig. 1) est une serrure multipoints de sécurité antipanique avec déverrouillage mécanique, signalisation d’état intégrée, trois pênes dormants et trois pênes pivotants bloquants (en anglais : fliplatch) avec insonorisation.
All manuals and user guides at all-guides.com Fig. 1 : Serrure multipoints Exemple de Exemple de de sécurité antipanique variante de variante de mFlipLock check produit pour une produit pour une porte à un vantail porte à deux vantaux Identification des variantes du produit Identification Signification Tab.
All manuals and user guides at all-guides.com Explication de la terminologie employée Pos. Désignation Explication de la terminologie employée – Fonction porte Une porte avec fonction de porte de secours peut toujours être ouverte (généralement de l'intérieur) par de secours / la béquille, même si elle est verrouillée.
Page 71
All manuals and user guides at all-guides.com Fig. 2 : Représentation schéma- tique de la serrure mFlipLock check Fig. 3 : Jeu de fonctionnement Information sur le produit...
All manuals and user guides at all-guides.com Indications À propos de cette notice Cette notice d’installation et de montage a été rédigée à l’attention des professionnels de l’artisanat et du personnel initié. Lisez ces instructions afin d’installer et d’utiliser l’appareil en toute sécurité et de pouvoir exploiter toutes les possibilités de mise en œuvre proposées.
All manuals and user guides at all-guides.com Consignes de sécurité Aver tissement ! Danger de mort et risque de blessure en cas de réduction de la fonction de protection incendie : les portes coupe-feu (et portes pare-fumée) empêchent la propagation du feu (de la fumée). Les essais relatifs aux portes coupe-feu sont effectués sur le système complet de porte coupe-feu.
Page 74
All manuals and user guides at all-guides.com Aver tissement ! Les fermetures inadéquates nuisent à la sécurité des personnes et à la protection incendie : la serrure est appropriée pour les portes coupe-feu et pare-fumée (« Clé de classification », page 80). · Vérifiez si la certification de la porte est adaptée à la serrure. ·...
Page 75
All manuals and user guides at all-guides.com At tention ! Risques de dommages matériels liés à des interventions sur le vantail de porte : avant de procéder à des travaux sur le battant de porte, tels que les perçages et les fraisages, la serrure doit être démontée. Restriction de la fonction en cas de jeu de fonctionnement incorrect : réglez le jeu de fonctionnement (« Explication de la terminologie employée », page 70) correctement (« Caractéristiques techniques », page 89).
All manuals and user guides at all-guides.com Utilisation conforme à l‘usage prévu La serrure multipoints de sécurité antipanique mFlipLock check est appropriée pour le montage sur des portes à cadre tubulaire, pleines ou en PVC à un ou à deux vantaux. Elle ne convient pas pour des portes va-et-vient.
All manuals and user guides at all-guides.com Fonctions et utilisation Verrouillage automatique La serrure possède une fonction de verrouillage automatique mécanique et ainsi la porte fermée est toujours verrouillée. La Fig. 5 : Pêne pilote serrure se déverrouille par l’entraînement moteur ou l’actionne- Pêne demi-tour ment mécanique.
All manuals and user guides at all-guides.com Variantes de produit mFlipLock check avec fonction anti-panique E Fouillot continu Le système mFlipLock check est équipé d’un fouillot traversant de sorte que les béquilles intérieure et extérieure sont toujours embrayées. Généralement, une garniture avec bouton est montée à l’extérieur (dans le sens inverse de l’évacuation) et une garniture pour porte de secours est montée à...
Page 79
All manuals and user guides at all-guides.com Fonctions et utilisation...
All manuals and user guides at all-guides.com Clé de classification EN 1125 verrouillages de portes anti-panique La clé de classification indique les caractéristiques de serrures selon la norme EN 1125. Tab. 4 indique les significations des diverses positions de la clé de classification. Tab.
All manuals and user guides at all-guides.com EN 179 - Fermetures pour portes de secours La clé de classification indique les caractéristiques de serrures selon la norme EN 179. Tab. 5 indique les significations des diverses positions de la clé de classification. Tab.
All manuals and user guides at all-guides.com Montage Aver tissement ! Recherche d’éventuels dommages : les dommages aux câbles peuvent entraîner des électrocutions. Les dommages des pièces métalliques peuvent être à l’origine de blessures. Un appareil endommagé consti- tue un risque pour la sécurité. ·...
Page 83
All manuals and user guides at all-guides.com Fig. 6 : Éviter les dommages matériels max. 150 N Montage...
All manuals and user guides at all-guides.com Montage Prudence ! Risque de blessures en raison de bords coupants et de copeaux : les travaux de perçage et les autres travaux générant des copeaux peuvent conduire à des blessures dues aux arêtes vives et copeaux. ·...
All manuals and user guides at all-guides.com Montage de la serrure At tention ! Protéger la porte contre les fermetures non souhaitées : la serrure verrouille automatiquement lorsque la porte se ferme. Le déverrouillage est ensuite uniquement possible à l’aide d’un signal de commande électrique ou par l’actionnement du cylindre de fermeture.
Une telle nervure doit être supprimée au niveau de la surface de glissement du pêne demi-tour et du pêne dormant. ASSA ABLOY Sicherheitstechnik GmbH recommande l’utilisation d’une têtière dotée d’une pièce de glissement pour générer une surface de glissement plane.
All manuals and user guides at all-guides.com Contrôle manuel de la serrure avec verrouillage automatique Fig. 9 : Contrôle fonctionnel manuel (avec verrouillage automatique) Montage...
All manuals and user guides at all-guides.com Contrôle manuel de la serrure sans verrouillage automatique Fig. 10 : Contrôle fonctionnel manuel (sans verrouillage automatique) Montage...
All manuals and user guides at all-guides.com Caractéristiques techniques Tab. 6 : Désignation Caractéristique Caractéristiques Axe de fouillot : porte à cadre tubulaire et porte à vantail plein 30 mm à 80 mm (par pas de 5 mm) techniques Entraxe pour le cylindre rond suisse 94 mm Entraxe pour cylindre profilé...
All manuals and user guides at all-guides.com Affectation des câbles mFlipLock check Fig. 11 : Connexion enfichable mFlipLock check Broche Connecteur Broche Connecteur Fliplock Check Câble de Fliplock Check Câble de raccordement raccordement noir noir rose rose vert vert violet violet rouge rouge...
Page 91
All manuals and user guides at all-guides.com Tab. 7 : Kabelfarbe Titel Kontakt Stecker PIN Bemerkung/Funktion Affectations du câble de gris Pêne pilote État du pêne pilote (à monter en raccordemen série avec le contact de porte ext.) Pêne pilote sorti : COM-NO ouvert marron Pêne pilote rentré :...
All manuals and user guides at all-guides.com Accessoires Têtières Fig. 12 : Têtières pour bois BV-24421.R3243.2 BV-24421.R3243.1 19,4 19,4 Accessoires...
Page 93
All manuals and user guides at all-guides.com Fig. 13 : Têtières pour métal BV-24421.R6333.2 BV-24421.R6333.1 19,4 19,4 Accessoires...
All manuals and user guides at all-guides.com Barre de poussée anti-panique et barre de manœuvre anti-panique Accessoires selon la norme EN 1125 Barre anti-panique MSL 5971.294 pour cylindre à profil européen distance 5971.392 pour cylindre ronde suisse distance 94 Barre de poussée anti-panique MSL (Pushbar) (eBar) 5980 eBar mécanique 5981 eBar mécanique avec contacts sans potentiel 5982 eBar mécatronique...
All manuals and user guides at all-guides.com Maintenance www.assaabloy.ch At tention ! Une lubrification non conforme endommage la serrure : Ne pas graisser l’intérieur de la serrure. Ne pas injecter de lubrifiants dans la serrure. Ne pas utiliser de graisses résineuses. ·...
All manuals and user guides at all-guides.com Garantie, élimination Garantie La durée de garantie légale et les conditions générales de vente et de livraison de ASSA ABLOY (Schweiz) AG (www.assaabloy.ch) s’appliquent. Élimination Éliminer les composants selon les instructions relatives au système EPD (Environmental Product Declaration).
All manuals and user guides at all-guides.com Problème, cause, solution Problème Cause Solution La porte s’ouvre par Le pêne dormant ne sort pas lorsque la porte est Réglez la porte et la position de la gâche, de sorte poussée manuelle ou en fermée.
Page 98
La presente documentazione, in tutte le sue parti, è protetta dal diritto d’autore. Qualsiasi uso o modifica al di fuori dei ristretti limiti imposti dalla legge sul copyright senza il consenso di ASSA ABLOY (Schweiz) AG è vietato e punibile dalla legge.
Page 99
All manuals and user guides at all-guides.com Indice Informazioni sul prodotto ..100 Montaggio..... . . 114 Descrizione del prodotto .
All manuals and user guides at all-guides.com Informazioni sul prodotto Descrizione del prodotto mFlipLock check Il mFlipLock check (Fig. 1) è uno dei sistemi di bloccaggio multipli antipanico con sbloccaggio meccanico, feedback di stato integrato, tre chiavistelli e tre scrocchi inclinabili bloccanti (in inglese: fliplatch) con isolamento acustico.
All manuals and user guides at all-guides.com Fig. 1 : Sistema di bloccaggio Esempio di una Esempio di una multiplo antipanico variante di variante di mFlipLock check prodotto per una prodotto per una porta a 1 anta porta a 2 ante Contrassegno delle varianti di prodotto Tab.
All manuals and user guides at all-guides.com Spiegazione dei concetti Numero Designazione Spiegazione dei concetti – Funzione di porta Una porta con funzione di porta di fuga può sempre essere aperta nella direzione di fuga (di norma di fuga / funzione verso l’interno) tramite la maniglia a leva, anche quando è...
Page 103
All manuals and user guides at all-guides.com Fig. 2 : Rappresentazione schematica della serratura mFlipLock check Fig. 3 : Luce di funzionamento Informazioni sul prodotto...
All manuals and user guides at all-guides.com Note Nota sulle presenti istruzioni Le presenti istruzioni per l’installazione e il montaggio sono destinate a personale specializzato e qualifica- to. Leggere il presente manuale per installare e utilizzare l’apparecchio in modo sicuro e per sfruttarne le applicazioni consentite.
All manuals and user guides at all-guides.com Istruzioni di sicurezza Av ver timento! Pericolo di morte e pericolo di lesioni dovuti a una resistenza al fuoco ridotta: Le porte tagliafuoco (anche le porte tagliafumo) impediscono alle fiamme (al fumo) di propagarsi negli ambienti adiacenti. Queste porte vengono testate in ogni aspetto.
Page 106
All manuals and user guides at all-guides.com Av ver timento! Le serrature inadeguate riducono la protezione contro le lesioni personali e la protezione antincen- dio: La serratura è indicata per porte tagliafuoco e porte antifumo (”Codice di classificazione”, pagina 112). · Verificare che la certificazione della porta si applichi alla serratura. ·...
Page 107
All manuals and user guides at all-guides.com At tenzione! Danni materiali causati da lavori sul pannello porta: La serratura deve essere rimossa prima di lavori sul pannello porta, ad esempio per l’esecuzione di fori o fresature. Funzionamento limitato in caso di regolazione errata della luce: Impostare la luce di funzionamento (”Spiegazione dei concetti”, pagina 102) in modo adeguato (”Dati tecnici”, pagina 121) Danni materiali dovuti all’uso di una contropiastra non adatta.
All manuals and user guides at all-guides.com Uso conforme Il sistema di bloccaggio multiplo antipanico mFlipLock check è indicato per porte in telaio tubolare a 1 o 2 ante, a pannello pieno o porte con profili in plastica. Non è indicato per porte a vento. La serratura è...
All manuals and user guides at all-guides.com Funzioni e azionamento Autobloccaggio La serratura si autoblocca meccanicamente e la porta, se chiusa, si Fig. 5 : trova dunque sempre bloccata. La serratura si blocca mediante un Saliscendi azionamento meccanico. Scrocco inclinabile Principio di funzionamento durante il bloccaggio Chiavistello Durante la chiusura della porta gli scrocchi inclinabili estratti...
All manuals and user guides at all-guides.com Varianti di prodotto mFlipLock check con funzione antipanico E Nottolino passante Il mFlipLock check è dotato di un nottolino passante in modo tale che la maniglia interna è accoppiata e la maniglia esterna non è accoppiata. Solitamente, all’esterno (nella direzione opposta a quella di fuga) è montata una placca con pomolo, all’interno (nella direzione di fuga) una placca di porta di fuga.
Page 111
All manuals and user guides at all-guides.com Funzioni e azionamento...
All manuals and user guides at all-guides.com Codice di classificazione Dispositivi antipanico EN 1125 Il codice di classificazione descrive le caratteristiche delle serrature ai sensi della norma EN 1125. Tab. 4 spiega il codice di classificazione. Tab. 4 : Classe Significato Codice di classificazione ai sensi della norma Elevata frequenza d'uso da parte di persone poco attente, dove non si esclude la possibilità...
All manuals and user guides at all-guides.com Dispositivi per uscita d’emergenza EN 179 Il codice di classificazione descrive le caratteristiche delle serrature ai sensi della norma EN 179. Tab. 5 spiega il codice di classificazione. Tab. 5 : Classe Significato Codice di classificazione Elevata frequenza d'uso da parte di persone poco attente, dove non si esclude la possibilità...
All manuals and user guides at all-guides.com Montaggio Av ver timento! Verificare la presenza di danni: I danni al cavo possono essere causa di lesioni. i componenti metallici danneggiati possono essere causa di lesioni. Un dispositivo danneggiato rappresenta un rischio per la sicurezza.
Page 115
All manuals and user guides at all-guides.com Fig. 6: Evitare danni materiali max. 150 N Montaggio...
All manuals and user guides at all-guides.com Montaggio Prudenza! Pericolo di lesioni dovuto a spigoli vivi e trucioli: durante la trapanatura e altri lavori ad asportazione di truciolo, sussiste il pericolo di lesioni dovuto a spigoli vivi e trucioli. · Proteggere gli occhi con occhiali di protezione idonei. Operazioni preliminari al montaggio Prudenza! Le porte non idonee riducono la protezione contro l’effrazione e le lesioni personali: La serratura deve...
All manuals and user guides at all-guides.com Montaggio della serratura At tenzione! Proteggere la porta da chiusure involontarie: Nei modelli con l’aggiunta “autobloccaggio” la serratura blocca automaticamente una porta e può essere sbloccata solo tramite un segnale di comando elettrico o tramite il cilindro di chiusura.
Questo perno profilato deve essere rimosso nella zona degli scrocchi e del saliscendi. Per creare una superficie di scorrimento piana, ASSA ABLOY Sicherheitstechnik GmbH consiglia di utilizzare una contropiastra con assestamento a linguetta.
All manuals and user guides at all-guides.com Verificare manualmente la serratura con autobloccaggio Fig. 9: Verifica manuale di funzionamento (con autobloccaggio) Montaggio...
All manuals and user guides at all-guides.com Verificare manualmente la serratura senza autobloccaggio Fig. 10: Verifica manuale di funzionamento (senza autobloccaggio) Montaggio...
All manuals and user guides at all-guides.com Dati tecnici Tab. 6: Caratteristiche Ingombro Dati tecnici Entrata maniglia: Porta in telaio tubolare e porta a pannel- Da 30 mm a 80 mm (a intervalli di 5 mm) lo pieno Rimozione del cilindro tondo svizzero 94 mm Rimozione del cilindro a profilo europeo 92 mm...
All manuals and user guides at all-guides.com Occupazione del cavo mFlipLock check Fig. 11 : Connettore mFlipLock check Spina Spina FlipLock check Cavo di collega- FlipLock check Cavo di collega- mento mento nero nero rosa rosa verde verde viola viola rosso rosso grigio...
Page 123
All manuals and user guides at all-guides.com Tab. 7: Colore del cavo Titolo Contatto Spina PIN Osservazione/funzione Occupazione del cavo di grigio Saliscendi Stato del saliscendi (azionare con collegamento contatto est. della porta in serie) Saliscendi avanzato: COM-NO aperto marrone Saliscendi ritratto: COM-NO chiuso Maniglia sinistra...
All manuals and user guides at all-guides.com Accessori Contropiastre Fig. 12: Contropiastre per legno BV-24421.R3243.2 BV-24421.R3243.1 19,4 19,4 Accessori...
Page 125
All manuals and user guides at all-guides.com Fig. 13: Contropiastre per BV-24421.R6333.2 BV-24421.R6333.1 metallo 19,4 19,4 Accessori...
All manuals and user guides at all-guides.com Barra antipanico e maniglione antipanico Accessori ai sensi della norma EN 1125 Maniglione antipanico MSL 5971.294 per cilindro a profilo europeo distanza 92 5971.392 per cilindro tondo svizzero distanza 94 Maniglione antipanico MSL (Pushbar) (eBar) 5980 eBar meccanico 5981 eBar meccanico con contatti privi di potenziale 5982 eBar meccatronico...
All manuals and user guides at all-guides.com Manutenzione www.assaabloy.ch At tenzione! La lubrificazione non conforme danneggia la serratura: Non ungere l’interno della serratura. Non spruz- zare alcun tipo di lubrificante all’interno della serratura. Non utilizzare grasso da spalmare. · Ungere solo la superficie esterna di scorrimento della serratura. Lubrificante Produttore Osservazione...
All manuals and user guides at all-guides.com Garanzia, smaltimento Garanzia Si applicano i termini di garanzia a norma di legge e le condizioni di vendita e consegna di ASSA ABLOY Sicherheitstechnik GmbH (www.assaabloy.ch). Smaltimento Smaltimento ai sensi dell’EPD (Dichiarazione Ambientale di Prodotto).
All manuals and user guides at all-guides.com Problema, causa, soluzione Informazioni aggiornate Problema Causa Soluzione Premendo o tirando Nella porta chiusa il chiavistello non avanza. Regolare la porta e la posizione della contropiastra è possibile aprire la Lo scrocco inclinabile non si attacca liberamente in modo che lo scrocco inclinabile avanzi libera- porta con la mano, anche alla contropiastra.
Page 130
All manuals and user guides at all-guides.com Problema, causa, soluzione...
Page 131
All manuals and user guides at all-guides.com Abbildungen DE / EN / FR / IT Illustrations Illustrations Figure Abb. 14 : Maße: Schloss DM: Dornmaß Fig. 14 : Dimensions: Lock DM: Backset Fig. 14 : Dimensions : serrure DM : Axe de fouillot Fig.
Page 132
All manuals and user guides at all-guides.com Abb. 15 : Maße: Rohrrahmentür und Türzarge vorbereiten Fig. 15 : Dimensions: Prepare tubular frame door and door frame Fig. 15 : 5 , 5 Dimensions : préparer la porte à cadre tubulaire et le dormant Fig.
Page 133
All manuals and user guides at all-guides.com Abb. 16 : Schloss und Schließblech in Rohrrahmentür montieren Fig. 16 : Assemble lock and strike plate in tubular frame door Fig. 16 : Monter la serrure et la têtière sur la porte à cadre tubulaire Fig.
Page 134
All manuals and user guides at all-guides.com Abb. 17 : Maße: Vollblatttür und Türzarge vorbereiten Fig. 17 : Dimensions: Prepare timber door and door frame Fig. 17 : Dimensions : préparer la porte à vantail plein et le dormant 2 , 7 Fig.
Page 135
All manuals and user guides at all-guides.com Abb. 18 : Schloss und Schließblech in Vollblatttür montieren Fig. 18 : Assemble lock and strike plate in timber door Fig. 18 : Monter la serrure et la têtière sur la porte à vantail plein Fig.
Page 136
All manuals and user guides at all-guides.com ASSA ABLOY is the global ASSA ABLOY is the global leader in door opening solutions, leader in door opening solutions, dedicated to satisfying dedicated to satisfying end-user needs for security, end-user needs for security,...