Sleeve Installation - Assa Abloy Corbin Russwin CL3100 Series Installation Instructions Manual

Grade 1 Key-In-Lever VR Lever Lock
CL3100 Series
Installation Instructions
Function Specific Instructions - Sleeve Installation
See Specific Instructions Per Function. Identify Function On Box. (Example: CL3151)
For functions not shown, proceed to step 6, sleeve installation.
Outside Sleeve
Align driver tips and orient
the cam as illustrated on
page 5 step 5. Spline adapter
will move freely.
Align driver tips
(page 5 step 5). Spline
adapter will move freely.
6

Sleeve Installation

1. With driver tips aligned, insert outside sleeve first.
Dimple must face door edge.
2. Thread outside collar by hand. Tighten to bearing
assembly with wrench.
3. Insert inside sleeve. Dimple must face door edge.
4. Thread inside collar by hand. Tighten to bearing
assembly with wrench.
CAUTION
If excessive wrench torque is required, stop and
check alignment of driver tips: page 5 step 5.
For Installation Assistance contact Corbin Russwin
1-888-607-5703 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2016, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Driver
Function
Tip
Number
Color
NONE CL3132 Utility/Institutional
RED CL3157 Storeroom/Closet
Exits/Public Toilets/
RED CL3172
RED CL3151 Entrance/Office
RED CL3161 Entrance/Office
RED CL3193 Service Station
RED and Privacy/Bedroom/
CL3120
BLUE
RED and
CL3152 Classroom Intruder
GREEN
RED and Corridor/Dormitory
CL3175
GREEN
Function
Description
Align driver tips matching the painted sections
(page 5 step 5) and orient cam to depress lever
Apartment
Sleeve Installation (page 6 step 6)
Bathroom
Lock
Inside
Inside
4
4
3
3
Dimple
Dimple
Figure 8
Inside Sleeve
catch button (page 7 step 7).
Sleeve
Installation
Outside
Outside
2
2
1
1
Dimple
Dimple
Sleeve Installation
6
FM345 01/19