Cam Orientation; Rose Installation - Assa Abloy Corbin Russwin CL3100 Series Installation Instructions Manual

Grade 1 Key-In-Lever VR Lever Lock
CL3100 Series
Installation Instructions
7

Cam Orientation

1. Lock lever by button, if applicable.
2. Turn slotted cam until lever catch button can be depressed.
8

Rose Installation

D Rose
1. Orient cam and depress lever catch button (see cam orientation diagram page 7 step 7). The
lever catch button will slide into the lever catch slot in the cam. Use the rose installation tool
(RIT) to retain the lever catch button - see Figure 10 below for RIT instructions (for D rose
installation only). Lock lever by button, if applicable.
2. Install rose support plate. Note the flange orientation and door prep.
3. Install rose support plate collar and tighten with CL3100 wrench.
4. Install rose onto support plate.
C, E and K Rose
2A. Install C, E or K rose.
Note the flange and
bearing operation.
3A. Install rosette and tighten
with the CL3100 wrench.
CAUTION
If excessive wrench torque
is required, stop and
check for cross-threading.
A. Depress lever
A. depress lever
catch button
catch button
Figure 10
Rose Installation Tool
For Installation Assistance contact Corbin Russwin
1-888-607-5703 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2016, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Slotted cam orientation:
Standard cylinder
Lever catch slot
Lever catch slot
Lever catch
Lever catch
button
button
Tailpiece slot
Tailpiece slot
Figure 9
Inside
Inside
3A rosette
3A. Rosette
D rose installation
D rose installation
B. capture lever
B. Capture lever
catch button catch button
Slotted cam orientation:
IC cylinder
Cam Orientation
C,E and K rose installation
C, E and K rose installation
2A. Rose
2A rose
bearing assembly
Bearing assembly
1 lever catch button
1. Lever catch button
2 rose
3. Rose
support
support
plate
plate
Figure 11
Rose Installation
Orientation
Lever catch slot
Lever catch slot
Lever catch Lever cat
Lever catch
button
button
Tailpiece slot Tailpiece slot
C, E & K Rose
Installation
D Rose
Installation
3 tighten rose
3. Tighten rose
support plate support plate
1 rose
1. Rose
installation
installation
tool
tool
Outside
Outside
4 rose
4. Rose
7
Cam
FM345 01/19