DigiDesign D-Control Manual page 78

Knee/Hysteresis and Ratio/Range Controls
Knee
indicator
Knee
Ratio/Range
encoder
Ratio
indicator
Ratio
Knee/Hysteresis and Ratio/Range controls in the Dynamics section
Knee/Hysteresis Control
The top encoder in this section controls the knee shape or the
hysteresis value for the current plug-in page, depending on
which indicator is lit. The Auto indicator under the encoder
knob lights when the displayed parameter is enabled for auto-
mation.
Ratio/Range Control
The bottom encoder in this section controls the compression
ratio or the range value for the current plug-in page, depend-
ing on which indicator is lit. The Auto indicator under the en-
coder knob lights when the displayed parameter is enabled for
automation.
70 D-Control Guide
Knee/Hysteresis
encoder
auto
Hysteresis
indicator
Hyst
auto
Range
indicator
Range
Attack and Release Controls
Attack
encoder
auto
Attack
Release
encoder
auto
Release
Attack and Release controls in the Dynamics section
Attack Control
The top encoder in this section controls the attack value for
the current plug-in. The Auto indicator under the encoder
knob lights when the parameter is enabled for automation.
Release Control
The bottom encoder in this section controls the release value
for the current plug-in. The Auto indicator under the encoder
knob lights when the parameter is enabled for automation.