DigiDesign D-Control Manual page 105

Operation Switch (Page 2)
PanBot (Pan on Lower Encoder) Determines whether Pan con-
trols are displayed on the bottom encoder of each channel,
even when another type of controls is displayed on the upper
encoders.
For stereo tracks, the encoder shows by default L (left
channel). To change to the R channel, press Select.
Encod (Encoder Order) Determines whether inserts, sends, and
pan controls will be displayed in order from top-to-bottom or
bottom-to-top on D-Control rotary encoders.
ApTrgt (Target Track from Application) Determines whether se-
lecting an Insert or Send on-screen focuses its track on the
D-Control Main Unit.
Faders (Faders On/Off) Temporarily turns off D-Control faders
to prevent fader movement when monitoring a mix.
ChanWn (Channel Window Display) Determines whether dis-
playing plug-in or send pan parameters (by pressing an en-
coder Select switch) on D-Control opens the corresponding
plug-in or send window on-screen in Pro Tools. Also deter-
mines whether the Channel Select switches (in the Dynamics
or EQ sections) change the channel display of multi-mono
plug-ins.
When this preference is set to "Yes," the on-screen display
of plug-in and send windows changes to reflect the state of the
control surface.
When this preference is set to "No," the on-screen display of
plug-in and send windows does not change to reflect the state
of the control surface.
Select (Select Switch Latch Mode) Determines whether chan-
nel Select buttons follow latching or exclusive-or (non-latch-
ing) behavior when in Select mode.
Operation Switch (Page 3)
Import PIMaps (Import Plug-in Maps) Opens "Choose a map-
ping file" dialog in Pro Tools.
Export PIMaps (Export Plug-in Maps) Opens "Save Plug-in
Mapping As" dialog in Pro Tools.
TchVal (Touch Display of Parameter Values On/Off) Turns off
the display of parameter values when faders or encoders are
touched.
CFTrks (Custom Faders Display Hidden Tracks) Determines
whether tracks that are hidden in Pro Tools are displayed or
hidden in Custom Fader modes. Tracks that are hidden in
Pro Tools but shown in Custom Faders cannot be Selected or
Record enabled.
Brdcst (Broadcast) Determines whether the XMON monitor-
ing system is in Broadcast mode, which prevents AFL and PFL
solo modes from changing the XMON Control Room Input
source.
Trk/Ed (Link Track and Edit Selection) Toggles the Options >
Link Track and Edit Selection option, which automatically se-
lects a track or range of tracks when a selection is made in the
track's timeline.
Chapter 9: Management Sections 97