DigiDesign D-Control Manual page 69

Global Inserts Switch
The Global Inserts switch displays inserts on the rotary encod-
ers across all channels.
Global Pan Switch
The Global Pan switch displays the channel pan controls on
the rotary encoders across all channels.
Global Sends Switch
The Global Sends switch displays the send controls on the ro-
tary encoders across all channels.
Channel Strip Master Function Controls
The Channel Strip Master Function controls are used to
change modes for the channel Select switches, channel dis-
plays, clear Solo and Mute states, and globally suspend auto-
mation.
Sel
Select/Focus Mode
switch and indicators
Solo Clear
Mute Clear
Disp Mode
Auto Suspend
Channel Strip Master Function controls
Escape Switch
The Escape switch is used to exit modes and to cancel opera-
tions or on-screen dialogs. When an action has occurred that
can be exited or canceled with the Escape switch, the switch
flashes.
Escape switch
Escape
Focus
Mode
Solo Clear switch
Mute Clear switch
Display Mode switch
Suspend Automation
switch
Select/Focus Mode Switch and Indicators
The Select/Focus Mode switch toggles the function of channel
Select switches between Select and Focus mode. In Select
mode, channel Select switches are used to select channels in
Pro Tools. In Focus mode, channel Select switches are used to
focus a channel's controls on the Focus Channel Strip on the
Main Unit.
The LEDs on either side of this switch indicate the current
mode.
Solo Clear Switch
The Solo Clear switch clears all latched Solo switches in the
session. This switch flashes when any channel is soloed.
Mute Clear Switch
The Mute Clear switch clears all mutes for all tracks in the ses-
sion. This switch lights when any channel is muted.
Display Mode Switch
The Display Mode switch toggles the channel display between
the five display modes: Track Name, Group/ Name, Channel
Number/Name, Headroom Value, and Level modes. See
"Channel Display" on page 51 for more information.
Automation Suspend Switch
The Automation Suspend switch suspends reading and writ-
ing of all automation on all tracks in the session. All channels
are left in their current automation mode, but automation op-
erations are temporarily suspended.
The Automation Suspend switch flashes while automation is
suspended.
Chapter 6: Channel Strip Controls 61