DigiDesign D-Control Manual page 107

Modes Switch
The Modes switch displays the following modes:
AWrtTo Start (Auto Write to Start on Stop) Automatically
writes current automation values from the insertion point
backward to the beginning of a selection or track when the
transport is stopped after an automation pass.
By default, Automatic Write to Start on Stop mode is enabled
for a single automation pass only. Hold Start+Alt (Windows)
or Control+Option (Mac) while pressing the Auto ToStrt
switch to configure the mode to remain enabled after an au-
tomation pass.
AWrtTo All (Auto Write to All on Stop) Writes current automa-
tion values to an entire selection or track when the transport
is stopped after an automation pass.
By default, Automatic Write to All on Stop mode is enabled for
a single automation pass only. Hold Start+Alt (Windows) or
Control+Option (Mac) while pressing the Auto ToAll switch
to configure the mode to remain enabled after an
automation pass.
AWrtTo End (Auto Write to End on Stop) Writes current auto-
mation values from the insertion point forward to the end of
a selection or track when the transport is stopped after an au-
tomation pass.
By default, Automatic Write to End on Stop mode is enabled
for a single automation pass only. Hold Start+Alt (Windows)
or Control+Option (Mac) while pressing the Auto ToEnd
switch to configure the mode to remain enabled after an au-
tomation pass.
AWrtTo Next (Auto Write to Next Breakpoint on Stop) Writes
current automation values from the insertion point forward
to the next automation breakpoint when the transport is
stopped after an automation pass.
Prefs Switch
The Prefs switch displays the following preferences:
Match Time Determines the AutoMatch Time, or the amount
of time it takes for automation values to return to the previ-
ously written value after an automation pass stops.
Glide Time Determines the AutoGlide Time, or the amount of
time it takes for surround pan values to move between two
points in an automation pass performed with the optional
D-Control surround panner.
Audio Files Switch
The Audio Files switch displays the following commands for
importing and exporting data into Pro Tools:
• Import Audio: File > Import > Audio
• Import MIDI: File > Import > MIDI
• Audio To Trk: File > Import > Audio To Track
• MIDI To Trk: File > Import > MIDI To Track
• Import SesDat: File > Import > Session Data
• Export Selctd: Regions List > Export Selected As Files
Show/Hide Switch
The Show/Hide switch displays commands from the
Show/Hide Tracks List menu.
Show/Hide Switch (Page 1)
• Show All: Show All Tracks
• Hide All: Hide All Tracks
• Show Selctd: Show Only Selected Tracks
• Hide Selctd: Hide Only Selected Tracks
• Show Inactv: Show Only Inactive Tracks
• Hide Inactv: Hide Only Inactive Tracks
Show/Hide Switch (Page 2)
• Show Audio: Show Only Audio Tracks
• Hide Audio: Hide Only Audio Tracks
• Show Aux: Show Only Auxiliary Inputs
• Hide Aux: Hide Only Auxiliary Inputs
• Show MIDI: Show Only MIDI Tracks
• Hide MIDI: Hide Only MIDI Tracks
Show/Hide Switch (Page 3)
• Show Instmt: Show Only Instrument Tracks
• Hide Instmt: Hide Only Instrument Tracks
You can select multiple Show/Hide categories by holding Shift
while pressing the corresponding Soft Key.
Chapter 9: Management Sections 99