DigiDesign D-Control Manual page 75

To open multiple plug-in windows:
Hold Shift while opening each new window. The new
plug-in windows are not targeted.
To swap multiple plug-in windows while changing track focus:
Focus a track with multiple plug-ins (for example, dynam-
1
ics, EQ and Pitch Shift plug-ins) by pressing the track's Select
switch.
Open multiple plug-in windows on the focused track while
2
holding the Shift modifier.
Hold Alt (Windows) or Option (Mac) while changing focus
3
to another track with multiple plug-ins by pressing the track's
Select switch.
Focused plug-ins with open windows swap into new plug-in
windows on-screen, wherever plug-ins are present in the new
track.
Making Plug-ins Inactive or Active
You can toggle the active/inactive status of a plug-in directly
from a channel strip without putting D-Control into Make
Inactive mode.
To toggle a plug-in active/inactive directly from a channel strip:
Press the Inserts switch on a channel strip to display the
1
names of the plug-ins on the channel's encoders.
Hold Control+Start (Windows) or Control+ Command
2
(Mac) and press the encoder Select switch for the plug-in.
Changing Plug-in Presets from Channel
Strips
You can activate next or previous settings in the Plug-in Li-
brarian menu directly from any channel strip on D-Control.
These commands mirror the Next and Previous Setting but-
tons in the plug-in header.
To enable the next or previous plug-in setting from a channel
strip:
Focus the plug-in in a channel strip so its controls are visible
1
on the channel strip encoders.
Hold Control (Windows) or Command (Mac) and press the
2
Page Up (Next) or Page Down (Previous) switch in that chan-
nel strip's Channel Strip Mode controls.
Copying and Pasting Plug-in Settings
You can copy plug-in settings from a plug-in and paste them
into another instance of the same plug-in directly from a
channel strip on D-Control, from either the top-level view or
the focused view of the plug-in.
To copy and paste plug-in settings from the top level plug-in view:
On channel strips where you want to copy and paste the
1
plug-in settings, press the Inserts switches to display the
names of the plug-ins on the channel encoders.
Copy the settings of a plug-in by holding Shift+Control
2
(Windows) or Shift+Command (Mac) and pressing the en-
coder Select switch under the name of the plug-in.
Paste the settings into another instance of the same plug-in
3
by holding Shift+Control (Windows) or Shift+Command
(Mac) and pressing the B/M/P switch under the name of that
plug-in.
You can use the Do To All and Do To Selected Global
Controls to copy and paste settings to all plug-ins at the
same insert position on all or all selected tracks.
To copy and paste settings from the focused plug-in view:
On channel strips where you want to copy and paste the
1
plug-in settings, focus the plug-ins on the channels so their
controls are visible on the channel strip encoders.
Copy the settings of a plug-in by holding Shift+Control
2
(Windows) or Shift+Command (Mac) and pressing the en-
coder Select switch under the bottom row of encoders of the
plug-in's channel.
Paste the settings into another instance of the same plug-in
3
by holding Shift+Control (Windows) or Shift+Command
(Mac) and pressing the B/M/P switches under the bottom row
of encoders for that plug-in.
Enabling Plug-in Automation
When plug-in names are displayed in top-level view on a
D-Control channel strip, you can quickly enable all parame-
ters of a plug-in for automation.
You can also use the Do To All or Do To Selected switches on
D-Control to automate multiple plug-ins in the same insert
position in a session.
Chapter 7: Plug-in Controls 67