DigiDesign D-Control Manual page 66

Send Level Switch
The Send Level switch enables and suspends writing of send
level automation on all tracks in the session.
Send Pan Switch
The Send Pan switch enables and suspends writing of send
pan automation on all tracks in the session.
Send Mute Switch
The Send Mute switch enables and suspends writing of send
mute automation on all channels.
Automation Write Controls
The Automation Write controls invoke the manual "Write to
Start/End/All" commands, the automatic "Write to
Start/End/All on Stop" automation commands, and the
"Write to Current Parameter" and "Write to All Enabled Pa-
rameters" snapshot automation commands in Pro Tools.
The "Write to Start/End/All" commands and the "Write to
Next" command can also be invoked from the Soft Keys sec-
tion of D-Control.
Automation
Write to All
switch
Automation
Write to End
switch
Automation Write controls
Start Switch
The Start switch writes the current automation value of all
write-enabled parameters to the start of a selection or track
when performing an automation pass.
To manually Write to Start:
Press the Start switch during playback.
To enable automatic Write to Start on Stop:
Hold the Start key (Windows) or the Control key (Mac) and
press the Start switch.
To disable automatic Write to Start on Stop:
Press the flashing Start switch.
58 D-Control Guide
Auto Write
Automation
Write to Start
switch
Start
Write to Current
Parameter
switch
All Current
Write to All Enabled
Parameters
switch
End All Enab
All Switch
The All switch writes the current automation value of all
write-enabled parameters to an entire selection or track when
performing an automation pass.
To manually Write to All:
Press the All switch during playback.
To enable automatic Write to All on Stop:
Hold the Start key (Windows) or the Control key (Mac) and
press the All switch.
To disable automatic Write to All on Stop:
Press the flashing All switch.
End Switch
The End switch writes the current automation value of all
write-enabled parameters to the end of a selection or track
when performing an automation pass.
To manually Write to End:
Press the End switch during playback.
To enable automatic Write to End on Stop:
Hold the Start key (Windows) or the Control key (Mac) and
press the End switch.
To disable automatic Write to End on Stop:
Press the flashing End switch.
Current Switch
The Current switch writes a snapshot of the current parameter
value to the currently displayed automation parameter.
All Enabled Switch
The All Enabled switch writes a snapshot of all current param-
eter values to all enabled automation parameters.
Global Controls
The Global controls are used to apply commands that affect
multiple channels in various ways.
Do to Selected
switch
Do to Sel Do to All
Set to Default
switch
Set to
Default
Global controls
Global
Do to All switch
Suspend Groups
switch
Suspend
Groups