Exporting To Usb 2.0 Generation Files (.Utg Files) - LeCroy USB Protocol Suite Advisor T3 User Manual

USB Protocol Suite User Manual

4.2.2 Exporting to USB 2.0 Generation Files (.utg files)

Before exporting to a .utg file, first make sure the .usb file contains traffic for only one
device:
Step 1 Hide all other device addresses in the trace, leaving only the address of your
Step 2 Save to a new file using the All and
Step 3 On the new file, you can now
Step 4 If the captured file was Hi Speed and was recorded in Auto-Speed Detect mode,
LeCroy Corporation
device and the Address 0 (the default enumeration address.)
Do not save hidden Packets/Transactions/Transfers selections.
Export... Packets to USB 2.0 ... Text File (.utg) ...
you must add a ping=here statement before the first SOF packets in the .utg file.
This is required because, when the capture is made in Auto-Speed Detect mode,
the first "Ping" sequence is not captured in the trace file.
Chapter 4: Software Overview
77