Recording Bus Data - LeCroy USB Protocol Suite Advisor T3 User Manual

Chapter 10: Recording Options

10.8 Recording Bus Data

To start recording USB traffic once the appropriate Recording Options have been set
perform the following steps. Note: If you have inserted any event triggers, be sure to
select Event Trigger under the General tab in the Recording Options dialog box.
Step 1 Select Start under Record on the Menu Bar
Your recording session can continue until it has finished naturally,
or you may need to stop manually by clicking
set the Recording Options.
To manually stop recording:
Step 1 Select Stop under Record on the Menu Bar
Click
Note:
When the recording session is finished, the bus traffic is saved to the hard drive as a file
named data.usb or whatever name you assign as the default filename.
To save a current recording for future reference:
Step 1 Select Save As under File on the Menu Bar.
Step 2 Give the recording a unique name and save it to the appropriate directory.
272
OR
Click on the Tool Bar.
OR
Click on the Tool Bar.
again during the uploading to upload only a portion of the recorded memory.
The manual Stop Recording feature is primarily of use when recording
low-speed traffic, which can take a long time to fill the recording buffer.
OR
Click on the Tool Bar.
You see the standard Save As screen.
USB Protocol Suite User Manual
on the Tool Bar, depending on how you
LeCroy Corporation