Advisor T3; Components; Front Panel - LeCroy USB Protocol Suite Advisor T3 User Manual

USB Protocol Suite User Manual

2.18 Advisor T3

The LeCroy USB Advisor T3™ USB 3.0 Protocol Analyzer is a verification system for
USB development and testing. It supports both USB 2.0 and USB 3.0. It can record USB
traffic and graphically present the logical transactions and events. It connects to a laptop
or desktop PC via USB 2.0.
The system can monitor traffic between USB 2.0 links using standard high-speed
compliant cables.
If configured for USB 3.0 testing, the system supports monitoring between SuperSpeed
links using USB 3.0 cables.

2.18.1 Components

The LeCroy Advisor T3 Analyzer package includes the following:
• One LeCroy USB Advisor T3 Analyzer
• DC Power Adaptor
• USB cables (three)
• Installation CD-ROM, including documentation
• Quick Start Guide
• Carrying Case

2.18.2 Front Panel

Figure 2.11 Advisor T3 Front Panel
The front panel has the following indicators and connectors:
Power LED (green if on)
Status LED (blue if system successfully initializes)
Analyzer Port A (downstream) Connects to Device under test.
Analyzer Port B (upstream)
Analyzer LEDs
Rec- Recording (red if recording enabled)
Trig- Trigger
2.0 - USB 2.0
3.0 - USB 3.0
LeCroy Corporation
(red while booting. If red for more than a minute, hardware failure.)
(green while initializing)
Connects to Host.
(green if triggering)
(yellow for Low and Full Speed)
(green for Hi Speed)
(green if link is up; flashes green while data transfers;
yellow if polling)
Chapter 2: General Description
47