And Serdes Busengine - LeCroy USB Protocol Suite Advisor T3 User Manual

Chapter 13: Updates
13.3.4 Manual Updates to Firmware, BusEngine, and
Serdes BusEngine
You can manually update the Firmware, BusEngine™, and/or Serdes BusEngine by
performing the following steps:
Step 1 Select Setup > Update Device on the Menu Bar to display the Update Device
Step 2 To update the Firmware, BusEngine, and/or Serdes BusEngine, first select its
Step 3 Click Update Selected or click Update All to update all three.
Note:
Step 4 Power cycle the Analyzer. Re-initialization takes a couple of minutes.
350
dialog:
The dialog shows the Device Name, Type, Current Version, Required Version,
Status, and File Name.
Note: Updating the CATCSync Bus Engine can take up to 40 minutes. For that
reason, it is recommended that you do not update it when its current status
is "OK".
check box.
The most current files were copied to your \LeCroy\USB Protocol Suite
directory when you installed the program.
USB Protocol Suite User Manual
LeCroy Corporation