Usbtracer/Trainer Features - LeCroy USB Protocol Suite Advisor T3 User Manual

Chapter 1: Overview
Please refer to the Universal Serial Bus Specification, version 2.0 for details on the
protocol. The USB specification is available from the USB Implementers Forum (USB-IF)
at:

1.3.2 USBTracer/Trainer Features

General
• Fully complies with USB specification revision 2.0.
• Supports Link Power Management extension to USB 2.0 specification.
• Allows reconfigurable hardware for future enhancements.
• Has field-upgradeable firmware and recording engine.
• Supports all USB speeds (480 Mb/s, 12Mb/s, and 1.5 Mb/s).
• Has dual recording channels to aid development of multiple speed functions
upstream and downstream of speed-matching hub or transaction translator.
• Displays bus traffic using color and graphics in the CATC Trace interface.
• Has free non-recording, view-only Trace Viewer software.
• Comes with online manual.
• Self-diagnoses at power on.
• Has a 36-month warranty and hot-line customer support.
• Works in conjunction with the LeCroy USBTrainer USB Traffic Generator hardware
module to create a fully customizable USB test platform.
Physical Components
• Hardware module for the LeCroy Universal Protocol Analyzer System
• Desktop or portable Microsoft Windows XP, Windows Vista 32, Windows Vista 64,
or Windows 7 (32 or 64) computer with USB capability
• Plug-and-Play USB installation
• High-impedance tap: Inserts non-intrusively in any branch of a USB system.
• 512 MB of physical data-recording memory
• Two all speed (Low, Full, or Hi-Speed) recording channels
• Full-Speed USB connection to desktop or portable host PC. Hi-Speed on
UPAS 2500H platform.
• Internal wide-range AC power supply
• Break-out board to interface to external test equipment
14
USB Implementers Forum
1730 SW Skyline Blvd.
Suite 203
Portland, OR 97221
USB Protocol Suite User Manual
Tel: +1/503.296.9892
Fax: +1/503.297.1090
Web: http://www.usb.org/
LeCroy Corporation