Mapping Endpoint Rpipe To Class/Vendor Decoding - LeCroy USB Protocol Suite Advisor T3 User Manual

USB Protocol Suite User Manual

8.2.4 Mapping Endpoint RPipe to Class/Vendor Decoding

To assign a Class/Vendor Endpoint RPipes decoding:
Step 1 Click the Apply Decoding Scripts button on the Toolbar.
Step 2 Select Map Endpoint RPipe to Class/Vendor Decoding to display the Request
Step 3 Click the Endpoint RPipes tab to display the Endpoint RPipes dialog box:
Step 4 Select an endpoint RPipe.
Step 5 Display the Class/Vendor Endpoint Decoding drop-down menu. The
Step 6 Select the type of decoding.
Step 7 Repeat the previous steps for any additional RPipes you would like to map.
Step 8 To retain a mapping from trace to trace DURING an application session, select
Step 9 Click OK.
LeCroy Corporation
OR
Right-click the Bulk/Int Transfer field to display the USB Device Request menu.
Recipients and Endpoints dialog box.
The RPipe field shows all RPipes found in the trace file. The displays shows the
Otg Host, HWA address, and Direction for the recipient. On the right are the
names of Class/Vendor Endpoint Decoding groups currently assigned to
endpoints. If blank, no decoding is assigned for a recipient.
Class/Vendor Endpoint Decoding options are the same as for Endpoints.
OR
Select No Decoding if you do not want any specific decoding.
the Keep Across Recordings checkbox.
Chapter 8: Decode Requests
167