Columns; Rows - LeCroy USB Protocol Suite Advisor T3 User Manual

USB Protocol Suite User Manual

5.44.1 Columns

To add a column, right-click a column header, select Add Column, and then select the
column name. You can also add a column by dragging the attribute field
(in the left column) from the Detail View into the Spreadsheet View.
To delete a column, right-click a column header and then select Remove Column.
To reposition a column, drag the column header to the new position.
To resize columns, select the column divider and drag the divider to the right or left.

5.44.2 Rows

To manipulate rows, right-click the left-most column gray area to display the following
commands:
Display Options
Real-time Statistics
Trace Views
Unhide cells
Zoom In
Zoom Out
Wrap
Show USB 2 Traffic Only
Show USB 3 Traffic Only
Hiding USB 2 Traffic
LeCroy Corporation
Opens the Display Options menu
(see "Display Options" on page 143).
Allows you to view traffic statistics as they occur.
See "Real Time Monitoring" on page 217.
Displays CATC Trace, Compressed CATC Trace,
Spreadsheet (Color), or Spreadsheet (B/W).
Unhide Filtered Traffic, Unhide VBus Power, or Unhide ALL
Increases the size of the displayed elements.
Decreases the size of the displayed elements.
Wraps displayed packets within the window.
Displays only USB 2.0 traffic.
Displays only USB 3.0 traffic.
Hides.
• SOF's: Start of Frames
• NAK's: NAK'ed Transactions
• Devices: Packets belonging to specified devices by
address and endpoint
• Chirps: Chirp-K and Chirp-J Bus conditions (these are
recorded only)
Chapter 5: Reading a Trace
121