Connect Harness Leads And Cables - Raven SC1 Installation Manual

CHAPTER 3

CONNECT HARNESS LEADS AND CABLES

An Implement-ready wiring harness is required on the tractor for connecting the disc or wheel control unit. The
IBBC connector will be used to connect the disc or wheel control to the tractor.
FIGURE 17. IBBC and IBBC Bracket with Antenna Connection
The implement harness is used to connect the IDU and terrain compensation module to the tractor. The hydraulic
harness needs to be connected to the IDU. This hydraulic harness ensures the control of the proportional valve
and the readout of the angle sensor.
NOTE: Tie-wrap the leads to ensure that they are attached free from vibration and friction.
IMPORTANT: Mount the CAN implement lead in such a way that the separate conductors coming from the protective
sleeve are directed downwards. This will help prevent water from penetrating into the protective sleeve.
IMPORTANT: Ensure that the leads do not get damaged during installation.
IMPORTANT: Press the connectors firmly into place until they click.
32 SC1™/TC1 Twin Disc Implement Steer Installation Manual