Overview Of The Optional Stone Protection Assembly - Raven SC1 Installation Manual

OVERVIEW OF THE OPTIONAL STONE PROTECTION ASSEMBLY

The optional stone protection assembly is designed to prevent damage to the steering discs and disc legs. The
assembly consists of one bracket and cylinder for each leg and a hydraulic accumulator.
If a disc contacts a rock, the optional stone protection assembly allows the disc and leg to adjust depth
independently from the implement and ride over the rock. This helps prevent damage to the discs and disc legs.
FIGURE 18. Stone Protection Assembly
FIGURE 19. Manometer Accumulator Kit (P/N 117-8000-203 Rev. B)
THIS KIT TO CONTAIN THE FOLLOWING ITEMS LISTED BELOW:
ITEM # QTY
1 1
H 334-8001-018
2 1
N 103-0159-018
3 1
N 417-0001-033
4 1
N 333-0012-452
5 1 N 333-0012-492
6 1
N 107-8000-129
7 1 N 107-8000-130
8 4
N 311-4060-136
9 4
N 312-6001-017
10 8
N 313-6000-010
Introduction: Overview of the Optional Stone Protection Assembly
1
Soil Level
PART #
ACCUMULATOR, 0.35L 210/30BAR
BRACKET, ACCUMULATOR, Ø91-96MM
GAUGE, PRESSURE, 0-250BAR
FITTING, BULKHEAD, 12L, 90DEG
GAUGE FITTING, 12L-R1/4, F-F
BRACKET, MANOMETER
BRACKET, MANOMETER, PROTECTION
SCREW SCKT CAP, 8.8, M6X20
HEX LOCK NUT DIN985 - 8 - M6
WASHER, ZN, DIN125A M6
230 mm
Min.
2
±750 mm
±150 mm
DESCRIPTION
INTRODUCTION
±900 mm
Adjustable
[118 mm up or
down]
O
15