Setting Up The Detector - AJAX LeaksProtect User Manual

Setting Up the Detector

You may rename the detector, change the location room, as well as delete
it from the list of devices of the hub.
1. Devices
2. LeaksProtect
3. Settings
First field
Room
Activate the siren if leak is detected
Signal Strength Test
Attenuation Test
User Manual
Delete Device
Setting
Detector name, can be edited
Selecting the virtual room to which the device is assigned
HomeSiren
If active, and
leakage is detected
Switches the detector to the signal strength test mode
Switches the detector to the signal fade test mode (available in
detectors with firmware version 3.50 and later)
Opens the detector User Manual
Disconnects the detector from the hub and deletes its settings
Value
StreetSiren
are activated when