Setting Up The Detector - AJAX CombiProtect User Manual

Motion Detector Sensitivity
Motion Detector Always Active
Glass Protection Sensitivity
Glass Protection Always Active
Temporary Deactivation
Firmware
Device ID

Setting Up the Detector

1. Devices
2. CombiProtect
3. Settings
Setting
First eld
Room
Delay when entering, sec
Delay when leaving, sec
Delays in night mode
Arm in night mode
Alarm LED indication
extender
Sensitivity level of the motion detector
If active, the motion detector is always in the
armed mode
Sensitivity level of the glass detector
If active, the glass detector is always in the
armed mode
Shows the status of the device: active,
completely disabled by the user, or only
noti cations about triggering of the device
tamper button are disabled
Detector rmware version
Device identi er
Value
Detector name, can be edited
Selecting the virtual room to which the device is
assigned
Selecting delay time when entering
Selecting delay time on exit
Delay turned on when using night mode
When turned on, the detector will switch to
armed mode when using night mode
Allows you to disable the ashing of the LED
indicator during an alarm. Available for devices
with rmware version 5.55.0.0 or higher
How to nd the rmware version or
the ID of the detector or device?