AJAX LeaksProtect User Manual page 5

States
1. Devices
2. LeaksProtect
Temperature
Signal Strength
Connection
Battery Charge
Lid
Leak Detected
Firmware
Device ID
Parameter Value
Temperature of the Detector. This is measured on the proces
and changes gradually.
Signal strength between the hub and the detector
Connection status between the hub and the detector
The battery charge level of the detector is displayed in
increments of 25%
The inbuilt tamper mode, which reacts to the body being
disassembled or damaged
Alarm indication when the moisture sensor contacts close
Detector firmware version
Device identifier