AJAX LeaksProtect User Manual page 7

Indication
The LeaksProtect light indicator may light up red or green depending on
the device status.
Indication When Pressing the "On" button
Pressing the power button (detector is switched on)
Switching on
Switching off
Turned-on detector indication
Event
Detector connection to
hub ocBridge
the , and
Hardware error
Leakage detected
Battery needs replacing
Event
Lights up green for a few
uartBridge
seconds
Blinks red continuously
Lights up red for about one
second
During the alarm, it slowly
lights up red and slowly
goes out
Lights up red while the button is held down
Lights up green while the device is switching on
Initially lights up red, then blinks three times
Indication
The detector requires repair,
please contact Support Service
Replacement of the detector
battery is described in
the Battery
Replacement paragraph
Indication
Note