AJAX LeaksProtect User Manual page 3

Connecting the Detector to the Ajax
Security System
Detector Connection to hub
Before starting connection:
1. Following the hub instruction recommendations, install the
on your smartphone. Create an account, add the hub to the
application
application, and create at least one room.
2. Go to the Ajax application.
3. Switch on the hub and check the internet connection (via Ethernet cable
and/or GSM network).
4. Ensure that the hub is disarmed and does not start updates by checking its
status in the mobile application.
Only users with administrative privileges can add the device to the hub.
How to connect the detector to the hub:
1. Select the Add Device option in the Ajax application.
2. Name the device, scan/write manually the QR Code (located on the body
and packaging), and select the location room.
3. Select Add — the countdown will begin.
4. Switch on the device.
The detector has a stiff "On" button — press down firmly to switch it on.
For the detection and interfacing to occur, the device should be located
within the coverage area of the wireless network of the hub (at a single
protected object).
Ajax