Table of Contents
Advertisement
5. USE STATIC SHIELDING CONTAINERS FOR
HANDLING AND TRANSPORT.
6. DO NOT SLIDE S.S. DEVICES OVER
ANY SURFACE.
7. AVOID PLASTIC,VINYL AND STYROFOAM ®
IN WORK AREA.
PORTIONS REPRINTED
WITH PERMISSION FROM TEKTRONIX INC.
AND GERNER DYNAMICS, POMONA DIV.
® Dow Chemical
sales@GlobalTestSupply.com
8. WHEN REMOVING PLUG-IN ASSEMBLIES
9. HANDLE S.S. DEVICES ONLY AT A
10. ONLY ANTI-STATIC TYPE SOLDER-
11. ONLY GROUNDED-TIP SOLDERING
Fluke-Direct
HANDLE ONLY BY NON-CONDUCTIVE
EDGES AND NEVER TOUCH OPEN EDGE
CONNECTOR EXCEPT AT STATIC-FREE
WORK STATION. PLACING SHORTING
STRIPS ON EDGE CONNECTOR HELPS
PROTECT INSTALLED S.S. DEVICES.
STATIC-FREE WORK STATION.
SUCKERS SHOULD BE USED.
IRONS SHOULD BE USED.
.com
1.888.610.7664
Advertisement
Table of Contents
