719 Specifications - Fluke 71 Series Calibration Manual

719 Specifications

Specifications are based on a one year calibration cycle and apply for ambient
temperature from +18 °C to +28 °C unless stated otherwise. Counts are the number of
increments or decrements of the least significant digit.
Model Range
-12 to
30G
30.0 psi
-12 to
100G
100.0 psi
Temperature coefficient: 0.01 % of range per °C for temperature ranges -10 °C to 18 °C and
28 °C to 55 °C
[1] In an RF field of 3 V/m between the frequencies of 1.6 GHz and 2.0 GHz, add 120 counts to
specified accuracy.
Range
(determined by Pressure Module)
Range
24 mA
Maximum load on mA source is 1000 Ω. With HART resistor on, maximum load is 750 Ω.
Fuseless overload protection
Temperature coefficient: 0.005 % of range per °C for temperature ranges -10 °C to 18 °C and 28 °C to
55 °C
[1] In an RF field of 3 V/m between the frequencies of 150 MHz and 250 MHz, add 75 counts to
specified accuracy.
Loop Supply
24 V dc nominal
Model
30G
100G
Table 27. 719 Pressure Sensor Input
Resolution Accuracy
± 0.025 % of positive
0.001
Range
(6 month calibration)
0.01
± 0.035 % of positive
Range
(1 year calibration)
Table 28. 719 Pressure Module Input
Resolution
Table 29. 719 DC mA Measure and Source
Resolution
0.001 mA
Table 30. 719 Pressure Source
Max Non- destructive
[1]
Pressure
60 psi
200 psi
±(% of Reading + Counts)
0.015 + 2
Range
-11 to 36.0 psi
-11 to 120.0 psi
Process Calibrators
Specifications
Accuracy
[1]
Accuracy
19