Sun Microsystems Ultra 10 Getting Started Manual page 25

What Next?
Read the choices below to determine what to do next.
If you want to use the additional preinstalled software, see "Additional
Preinstalled Software" on page en-12.
If you want to change the display characteristics, see "Changing the Display
Mode" on page en-24.
If you want to install optional system components, refer to "Installing Optional
Components" on page en-28.
If the system does not power on, or if there are any other problems, refer to
"Troubleshooting" on page en-36.
For More Information
The Sun Ultra 10 Software Supplement CD Part No. 704-6624, which is shipped with
your system, contains:
The Sun Ultra 10 Service Manual (provided in AnswerBook2™ and HTML
formats). This manual provides detailed procedures for removing and replacing
system parts and includes system specifications. You can also order this manual
in hardcopy (805-7764), or view it online at:
http://docs.sun.com:80/ab2
The Sun Ultra 10 ShowMe How Multimedia documentation, which demonstrates
Ultra 10 service procedures with interactive audio and video. These multimedia
procedures are integrated with the service manual.
Software patches to support PGX24 graphics when your system is running Solaris
2.5.1 or Solaris 2.6.
Readme (located at the top level of the CD directory)
To view this documentation, see "Viewing AnswerBook2 Documentation" on page
en-12.
Note – The Solaris 2.5.1 Hardware: 11/97 420+ MHz Installation CD (704-6657)
must be used with systems running Solaris 2.5.1 or 2.6. Refer to Solaris 2.5.1 and 2.6
for 420+ Mhz Systems Installation Guide (804-6658) for additional information.
en-11