12 3D quality control
12 3D quality control
12.1 Tools required
60
Planmeca Viso G7
A quality control test must be carried out on the X-ray unit once a month in
order to ensure consistent image quality.
A separate software program called Planmeca Device Tool QA has been
installed on your computer for this purpose.
NOTE
The views shown here are from software version 5.0.1. The views may be
slightly different in later software versions. To check the software version of
your Planmeca Device Tool QA program, go to Info > About.
Remove any patient supports attached to the X-ray unit. Attach this test
phantom into the adapter.
User's manual