Table of Contents
Advertisement
Maintenance and cleaning
Cleaning agents
10.1
84
───
WARNING
Ensure safe condition for cleaning work
Basically, electronic devices are not fail-safe. The condition is al-
ways safe when the unit is switched off and not energized. For
cleaning work, place the connected gear unit, motors and the ma-
chine in a safe state.
Carrying cleaning work during operation can lead to serious or fa-
tal injuries.
Do not immerse or hose down the gear unit
Wipe the gear unit only with cleaning agent and a cloth.
Due to impermissible solutions, cleaning by immersion can lead to
damage to the surface and the gear unit as well as to leak-tight-
ness problems.
Contamination, dust or chips can have a negative effect on the func-
tion of the components. In the worst case, contamination can lead to
failure. Therefore, clean and service the components at regular in-
tervals.
Carefully clean the components with a damp cloth or brush.
We will provide you with an overview of cleaning substances. Use
the cleaning agents with a maximum concentration of 3 %. A higher
concentration will damage the gear units. You will also receive infor-
mation about non-approved cleaning agents.
AG2250
Version: 2.0
Advertisement
Table of Contents
