Maintenance / Cleaning; Maintenance Schedule; Maintenance Tasks - Beckhoff AG2250 Documentation

Handling
4.4

Maintenance / Cleaning

4.4.1

Maintenance schedule

Maintenance tasks

Visual inspection
Check the tightening torques
Lubrication
4.4.2 Maintenance tasks
4.4.2.1 Visual inspection
• Check the entire gear unit for external damage.
• Check the entire gear unit for leaks.
◦ Further general information on the gear units can be found
◦ In the installation position, check that no foreign media (e.g. oil) accumulate on the drive and
output shaft.
4.4.2.2 Check the tightening torques
• Check the tightening torque of the fastening screws on the gear housing.
◦ The specified tightening torques can be found in Section 7 "Mechanical installation".
• Check the tightening torque of the set screws on the motor mounting.
◦ The specified tightening torques can be found in Section 7 "Mechanical installation".
12
During commis- For the first
sioning time, after 500
operating hours
or 3 months
x
x
x
Version: 1.4
Every 3 months Annually
x x
x
x
x
x
AG2250