Table of Contents
Advertisement
Conditions
6.1
Transport
6.2
Gear unit
6.2.1
Version: 2.0
Avoid damage to the components and loss of guarantee
Observe the conditions and the following chapters on transport and
storage.
Disregarding the conditions can lead to damage to the gear unit
and invalidation of the guarantee.
Make sure that the gear units are not damaged during transport and
storage.
Observe the specifications in the following chapters and comply with
the following conditions:
• Climate category: 2K3 according to EN 60721
• Temperature: -25 °C to +60 °C, maximum fluctuation 20 K/hour
• Air humidity: 15 % to 95 % relative humidity, no condensation
• Use of suitable means of transport
• Transport and storage only in a horizontal position
• Use of the vendor's original packaging
WARNING
Do not walk under suspended gear units
Use suitable means of transport and secure the gear unit against
falling down.
If the gear unit falls down it can cause a fatal accident.
Avoid hard knocks against the gear unit
Use suitable means of transport and secure the gear unit against
falling down.
Falling down and hard knocks will damage the gear unit.
Legal regulations for the lifting of loads
When transporting individual gear units or motor/gear unit combina-
tions without a hoist, adhere to the legal requirements for the lifting
of loads by employees.
The following options are available to you for the transport of a sin-
gle gear unit:
• Without aids, by hand in compliance with the legal requirements
for the lifting of loads
• Using a suitable hook or eye bolt in the shaft thread, with suffi-
ciently dimensioned hoists
• Using suitable transport slings on the gear unit with averaged
center of gravity, with sufficiently dimensioned hoists
AG2250
Transport and storage
───
73
Advertisement
Table of Contents
