ProFire PF2200-SB Product Manual page 56

Single burner controller
Hide thumbs Also See for PF2200-SB:
Table of Contents

Advertisement

Note:
When an attempt to make a setting change is conducted, the system will challenge the user for a
Password. Use the Arrow keys in the correct sequence followed by pressing the OK key to Authenticate
and continue to adjust settings. This security challenge resets after five minutes regardless of activity. It
is also important to note the system is capable of being setup for remote access that will allow for
setting changes from a remote location. This remote access is restricted to Non-Safety critical settings.
Drop-Down Menu Changes
To make changes to a Drop-down menu option there are two methods as follows.
Method One:
1. Highlight the Drop-down option menu you wish to set and press the Plus or Minus key.
2. Enter the password sequence in the Password prompt followed by pressing the OK key.
3. Use the Plus and/or the Minus keys to scroll through the different options of the Drop-down
menu.
Method two:
1. With the Drop-down menu highlighted press the OK button.
2. Enter the password sequence in the Password prompt followed by pressing the OK key.
3. Press OK again to expand the Drop-down menu.
4. Use the Up and Down Arrow keys to highlight your selection.
5. Press the OK key to set the selection.
Section 4: OPERATIONS and MAINTENANCE
V 4.0
Page 56 of 85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents