ProFire PF2200-SB Product Manual page 25

Safety Note: The keypad is intended to aid in commissioning and observe system status. As
such, the keypad is not considered part of nor should be incorporated into ANY safety function.
If user shut-down is a required safety function, then the user input must be hard-wired into the
ESD input of the BMS card.
This button toggles display modes from Operator to Commissioner.
Where Commissioner mode enables access to settings for
commissioning and Operator mode is intended as a mode to access
settings that can be adjusted while the appliance is in operation.
Toggles the status screen zoom level. Increments/decrements a setting
or combo box enumeration when on the settings screen.
This button provides a help menu for keypad actions.
Section 2: PF2200-SB PRODUCT DESCRIPTION
V 4.0
Page 25 of 85