ProFire PF2200-SB Product Manual page 52

4.3.1.1 SYSTEM START / STOP BUTTONS
Starting and stopping the burner can be done by selecting the Start or Stop button
on the PF2200.
When starting the burner, you will press the Start button where you will then be prompted on the
screen to acknowledge this action. Press the OK button to continue with the safe startup or shutdown
of the burner.
When shutting down the burner, press the Stop button. You will be prompted to confirm the
shutdown, press OK. When the shutdown process is complete, you will be prompted again to
acknowledge the shutdown is complete. Press OK to acknowledge the shutdown.
4.3.1.2 MANUAL SWITCH
With the optional Start/Stop switch, you can perform startups and shutdowns of the burner. This
switch has three functional positions as shown.
When in the Stop position the burner is shut down and de-energizes the panel. Moving the switch
from the run position to the Ignite position and holding the switch in the Ignite position for more
than 2 seconds will start the ignition sequence and return to the Run position.
By moving the switch from Stop to Run positions, you can clear a lock state.
Note:
Holding the switch in the Ignition position for more than 4.5 seconds will result in a system shutdown
on an External Stuck Switch event.
Section 4: OPERATIONS and MAINTENANCE
V 4.0
Page 52 of 85