Restrictions On Schedule Function - Christie LX501 User Manual

LX501/LX601i/LW401/LW551i/LWU421/LWU501i

6. Restrictions on Schedule function

This model supports the Schedule function on the Projector Web Control feature.
(Network Guide
the functions when Intellectual Stack with RS-232C connection is used. But for
Simple Stack without an RS-232C connection, there is no restriction on the
functions.
Regardless of whether Intellectual Stack or Simple Stack is used, take note of the
Schedule settings before using the Stack function. Unexpected setting changes
may occur when using the Stack function.
Refer to the following for the restrictions concerning Intellectual Stack. If you are
using Simple Stack, skip this chapter.
Restrictions on the Main projector
Functions
Power
status
Power On
Power Off
Input port change
My Image
Messenger
Slide Show
Restrictions on the Sub projector
Functions
Power
status
Power On
Power Off
Input port change
My Image
Messenger
Slide Show
 : This Schedule can be input to Projector Web Control and be executed even if
the projectors are operating in Intellectual Stack.
 *1): This Schedule can be input to Projector Web Control even if the projectors
(continued on next page)
Instant Stack Guide
→
3.1.7 Schedule
Main
Sub
Main
Sub
Settings) There are some restrictions on
LAMP MODE
DUAL ALTERNATE
ON ON
ON OFF
 
 
 *1)  *1)
 
 
X *3) X *3)
LAMP MODE
DUAL ALTERNATE
ON ON
ON OFF
X *3 X *3
 
 *1)  *1)
X *2)

X *2)

X *3) X *3)
30
DUAL/
ALTERNATE
OFF OFF
ON OFF
 
 
 *1)  *1)
X *2) X *2)
X *2) X *2)
X *3) X *3)
DUAL/
ALTERNATE
OFF OFF
ON OFF
X *3 X *3
 
 *1)  *1)
X *2)

X *2)

X *3) X *3)
020-000489-02 Rev. 1 (06-2012)