Parallax Boe-Bot Student Manual page 35

Testing for Communication
√
First, run your BASIC Stamp Editor by double-clicking the shortcut on your
desktop. It should look similar to the one shown in Figure 1-31.
The Windows Start Menu can also be used to run the BASIC Stamp Editor. Click your
Windows Start Button, then select Programs → Parallax, Inc. → Stamp Editor 2..., then
click the BASIC Stamp Editor Icon.
Your BASIC Stamp Editor window should look similar to the one shown in Figure 1-32.
The first time you run your BASIC Stamp Editor, it may display some messages and a list of
your COM ports found by the software.
√ If you know the number of the COM port your BASIC Stamp is connected to,
check to make sure it is included in the list.
√ If it is not included in the list, follow the BASIC Stamp Editor's instructions for
adding a COM port.
√ If you're not sure about your COM port, click OK for now.
Chapter 1: Your Boe-Bot's Brain · Page 21
Figure 1-30
BASIC Stamp
HomeWork Board
Ready to Program
Figure 1-31
BASIC Stamp
Editor Shortcut
Look for a
shortcut similar to
this one on your
computer's
desktop.