Power And Motor Connections (Single Phase) - Mitsubishi Electric D700-SC Easy Start Manual

Easy Start Guide
Mitsubishi D700-SC Series Inverter

1. Power and Motor Connections (Single Phase)

Live
Neutral
Earth
Notes:
The illustration above is based on the smaller
230V Single Phase frame size model (to
0.75kW). The terminal layout for larger 1.5kW
and 2.2kW frame sizes are similar.
The order of the three output phases
determines the direction the motor turns.
This guide has been produced by The Inverter Drive Supermarket Ltd.
All content, including but not limited to graphics, text and procedures copyright
Drive Supermarket and must not be reproduced or altered without prior written permission.
Before commencing, confirm that the Inverter and
all cables are completely isolated from the power
supply, have been isolated for at least 5 minutes
and that the motor is not turning.
N/-
T/L3
R/L1 S/L2
Power
Do not remove jumper
between terminals P1 and P/+
P1 P/+
U V
Motor
Important:
Use screened cable between the Inverter and
M o t o r. To m i n i m i s e e l e c t r o m a g n e t i c
interference, ensure the cable screen is
grounded.
T h e s u p p l y m u s t m a t c h t h e I n v e r t e r
specification.
© The Inverter
PR
W
Phase
Phase
Phase
Earth
Page 2