Preface - Siemens SIMATIC Mobile Client900WXN Operating Instructions Manual

Preface

Purpose of the operating instructions
These operating instructions provide information based on the requirements defined by
DIN EN 62079 for mechanical engineering documentation. This information relates to the
place of use, transport, storage, mounting, use and maintenance.
These operating instructions are intended for the following user groups:
● Operators
Operators operate and monitor the system during the process control phase.
● Commissioning engineers
The commissioning engineer integrates the HMI device into the system and ensures the
operating capability of the HMI device for the process control phase.
● Service technicians
Service technicians rectify faults that occur during the process control phase.
● Maintenance technicians
Maintenance technicians carry out regular maintenance work during the process control
phase.
Knowledge required
General knowledge of automation technology and process communication is needed to
understand the operating instructions.
Scope of application of the document
This source document was written in German, the basis for the translations, and applies to
the following HMI devices:
● SIMATIC Mobile Client900WXN, article number 6AV6645-7CF30-2AA0
Note
Observe the following points:
• This document belongs to the device and will also be required for repeat commissioning.
Keep all supplied and supplementary documentation for the entire service life of the
device.
• Make sure that the persons who require these documents have access to them.
• Pass on all of these documents to the subsequent owner of the device.
Mobile Client900WXN
Operating Instructions, 04/2015, A5E35883103-AB
3