Snorkel MHP1335 Operation Manual page 77

Index
Inspection and Maintenance Table, 7-1
L
Left side view of machine, 3-7
Light Flashing, 7-7
Lower control box, 7-7
M
Maintenance personnel
see Introduction - page iii
N
Nomenclature And Serial Numbers, 3-6
O
Operating Procedures, 8-1
Control Stations, 8-1
Emergency Stopping, 8-1
Moving The Platform, 8-4
Starting From Platform Control Box, 8-3
Operation, 8-1
Operators
Qualified, 7-1, 8-3
Other Safety Devices, 2-1
P
Placards and decals, 7-8
Inspection drawing, 7-11
Standard placards and decals, 7-8
Platform
Lanyard anchor points, 7-6
Pre-start Inspection, 1-1
Q
Qualified operators
see Introduction - page iii
R
RCD/ELCB Outlet (option), 5-1
Responsibilities of owners and users
see Introduction - page iv
Right side view of machine, 3-6
S
Safe Operation, 1-1
Safety Alerts, Caution, Danger, Warning
see Introduction - page iii
Safety Decals and Placards, 1-4
index 2
Safety Devices
Bubble level, 2-3
Emergency Stop Switches, 2-1
Flashing light, 2-4
Foot switch, 2-2
Gravity gate, 2-2
Guardrails, 2-2
Lanyard anchor points, 2-1
RCD/ELCB AC outlet, 2-4
Safety Device Information, 2-1
Safety precautions
Fuel Handling Precautions, 1-3
Hydraulic Systems, 1-3
Sandblast protection kit, 8-1
Securing for Day, 8-6
Stowing the MHP13/35, 10-1
Boom lock pins, 10-1
Structural damage and welds, 7-6
Boom welds, 7-6
T
Tipover hazard, 1-2
Towing
Bolt, D-Clamp or attaching device, 10-1
Covers and debris, 10-2
Jockey wheel, 10-2
Latching mechanism, 10-1
Rated speed, 10-2
Road lights, 10-2
Tow ball, 10-1
Under rated vehicle, 10-2
Transporting
Hoisting, 10-2
Lifting, 10-2
Users responsibility, 10-2
Transporting the MHP, 10-1
Securing to a Transport Vehicle, 10-3
Trailering, 10-2
Troubleshooting, 13-1
Operator Troubleshooting Chart, 13-1
W
Wheels and tyres, 7-5
Wiring harnesses, 7-3
Loose connections, 7-3
Work Place Inspection and Practices, 1-1
Working Envelope MHP13/35, 3-4
Working Envelope MHP15/44, 3-5
Rev C MHP13/35 & MHP15/44 V3 – 13619-1