Automatic Shut-Offs And Circuit Breakers; Rcd/Elcb Outlet (Option); Outriggers; Electrical Circuit Protection - Snorkel MHP1335 Operation Manual

Hide thumbs Also See for MHP1335:
Table of Contents

Advertisement

RCD/ELCB Outlet (option)

Figure 5.1 - RED/ELCB Outlet
The RCD (Re sid ual Cur rent De vice) is lo cated at
the base and will pro tect against short cir cuits to
earth. When there is a short cir cuit the RCD will
shut down the 230v AC power to the plat form out -
let.
To re set the out let dis con nect the power tool lead
from the plat form box and re set the RCD at the
base.
If the prob lem per sists call a trained ser vice tech ni -
cian.

Outriggers

Figure 5.2 - Outriggers
The MHP13/35 / MHP15/44 V3 booms can not be
raised un less the out rig gers are set and the lift en -
able light on the lower con trol box is lit. Once the
booms are raised from the stowed po si tion the out -
rig gers be come dis abled un til the booms are stowed
in the travel po si tion.
MHP13/35 & MHP15/44 V3 – 13619-1

5. Automatic Shut-offs and Circuit Breakers

Electrical Circuit Protection

There is only one (1) fuse, on a stan dard
MHP13/35 / MHP15/44 V3, that is ac ces si ble to the
op er a tor. Its pur pose is to pro tect the elec tri cal cir -
cuits from elec tri cal over loads. When the fuse
blows re place it with an iden ti cally rated fuse. If the
fuse blows a sec ond time, take the MHP13/35 /
MHP15/44 V3 out of ser vice and re fer the prob lem
to a qual i fied trained ser vice tech ni cian for re pair.
Rev C
page 5 - 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mhp1544

Table of Contents