Stabiliser Controls; Self Levelling Stabilisers (Option) - Snorkel MHP1335 Operation Manual

12. Enable Foot Switch (Option): The foot
switch performs the same function as the
standard enable switch described above.
Stepping on the foot switch is an action that
must be performed, at the same time as
another action, to make the platform move.
Figure 6.5 - Upper Controls Enable Foot
Switch, Option
Note:
If you have the op tional 'foot switch' fit ted this is
an "and" op tion and the En able switches on the
Lower and Up per Con trol Boxes will still func tion.
13. Lift Enable Indicator: The platform can only
be raised when this light is lit. When this light
is not lit the platform will not raise because
the outriggers are not properly set.
14. Fuel / Electric Selector Switch (Option):
This switch (when fitted) allows switching
between different motive sources (see
Options Chapter).
15. Overload Indicator: This indicator
illuminates when the platform is overloaded.
(See Safety Devices Chapter page 3)

Stabiliser Controls

Stabiliser Controls
MHP13/35 & MHP15/44 V3 – 13619-1
1. Boom / Stabiliser Switch: Ensure the
boom/stabiliser switch on the lower control
box is set to stabiliser (see Item 6 on page 2
of this chapter)
NOTE:
En sure that the front sta bi lis ers are low ered first
to pre vent dam age to the jockey wheel.
2. Valve Levers: Operate the valve levers to
activate the stabilisers and level the
machine.
3. Bubble level: Use the bubble level to level
the machine.

Self Levelling Stabilisers (Option)

Self levelling Stabiliser Controls
1. Auto Level / Stow Switch: Select either
auto level or auto stow, to raise or lower the
stabilisers automatically.
2. Manual Stabiliser Switches: Operate the
manual switches to manually raise or lower
individual stabilisers.
3. Leg Indicator Lights: Illuminate when the
legs are in contact with the ground.
4. Lift Enable Light: This is a duplicate of the
lift enable light on the lower control box. The
platform can only be raised when this light is
lit. When this light is not lit the platform will
not raise because the stabilisers are not set
properly.
NOTE:
En sure that the front sta bi lis ers are low ered first
to pre vent dam age to the jockey wheel.
Ac ti vate the rear sta bi lis ers and level the ma -
chine us ing the level bub ble ad ja cent to the con -
trol levers.
Rev C
6. Controls
page 6 - 5